Bem-vindo: Qui, 28 de Março 2024, 20:13 Pesquisa avançada

Mostre o seu Desktop!

Apresente aqui temas que gostou, skins de programas, ícones, wallpapers, conky's, etc. Ou seja, tudo o que possa alterar de estético no seu Ubuntu, apresente aqui. Em caso de dúvidas de personalização ou se quiser mostrá-la ao mundo, utilize esta secção!

Re: Mostre o seu Desktop!

Mensagempor Saresa » Sex, 6 de Setembro 2013, 2:17

Jellyfish


Editado pela última vez por Saresa em Sex, 6 de Setembro 2013, 23:05, em um total de 1 vez.
Avatar do usuário
Saresa
 
Mensagens: 306
Registrado em: 17 Setembro, 2011
Localização: Sorocaba-SP, Brasil

Re: Mostre o seu Desktop!

Mensagempor Patterson » Sex, 6 de Setembro 2013, 3:58

ambiencepnightblue
  • Sistema Operativo: Ubuntu 13.04
  • Tema: Ambiancepnightblue
  • Ambiente Gráfico: Unity
  • Ícones: Nitrux
  • Wallpaper: http://fin6.com/2013/08/black-wallpapers-2014/
  • Outros:
    • cairo dock: Default;
    • Ficheiro "clock_rings.lua":
      Spoiler:
      Código: Selecionar todos
      --[[
      Clock Rings by Linux Mint (2011) reEdited by despot77

      This script draws percentage meters as rings, and also draws clock hands if you want! It is fully customisable; all options are described in the script. This script is based off a combination of my clock.lua script and my rings.lua script.

      IMPORTANT: if you are using the 'cpu' function, it will cause a segmentation fault if it tries to draw a ring straight away. The if statement on line 145 uses a delay to make sure that this doesn't happen. It calculates the length of the delay by the number of updates since Conky started. Generally, a value of 5s is long enough, so if you update Conky every 1s, use update_num>5 in that if statement (the default). If you only update Conky every 2s, you should change it to update_num>3; conversely if you update Conky every 0.5s, you should use update_num>10. ALSO, if you change your Conky, is it best to use "killall conky; conky" to update it, otherwise the update_num will not be reset and you will get an error.

      To call this script in Conky, use the following (assuming that you save this script to ~/scripts/rings.lua):
          lua_load ~/scripts/clock_rings.lua
          lua_draw_hook_pre clock_rings
         
      Changelog:
      + v1.0 -- Original release (30.09.2009)
         v1.1p -- Jpope edit londonali1010 (05.10.2009)
      *v 2011mint -- reEdit despot77 (18.02.2011)
      ]]

      settings_table = {
          {
              -- Edit this table to customise your rings.
              -- You can create more rings simply by adding more elements to settings_table.
              -- "name" is the type of stat to display; you can choose from 'cpu', 'memperc', 'fs_used_perc', 'battery_used_perc'.
              name='time',
              -- "arg" is the argument to the stat type, e.g. if in Conky you would write ${cpu cpu0}, 'cpu0' would be the argument. If you would not use an argument in the Conky variable, use ''.
              arg='%I.%M',
              -- "max" is the maximum value of the ring. If the Conky variable outputs a percentage, use 100.
              max=12,
              -- "bg_colour" is the colour of the base ring.
              bg_colour=0xFFFFFF,
              -- "bg_alpha" is the alpha value of the base ring.
              bg_alpha=0.1,
              -- "fg_colour" is the colour of the indicator part of the ring.
              fg_colour=0xFFFFFF,
              -- "fg_alpha" is the alpha value of the indicator part of the ring.
              fg_alpha=0.2,
              -- "x" and "y" are the x and y coordinates of the centre of the ring, relative to the top left corner of the Conky window.
              x=100, y=150,
              -- "radius" is the radius of the ring.
              radius=50,
              -- "thickness" is the thickness of the ring, centred around the radius.
              thickness=5,
              -- "start_angle" is the starting angle of the ring, in degrees, clockwise from top. Value can be either positive or negative.
              start_angle=0,
              -- "end_angle" is the ending angle of the ring, in degrees, clockwise from top. Value can be either positive or negative, but must be larger than start_angle.
              end_angle=360
          },
          {
              name='time',
              arg='%M.%S',
              max=60,
              bg_colour=0xFFFFFF,
              bg_alpha=0.1,
              fg_colour=0xFFFFFF,
              fg_alpha=0.4,
              x=100, y=150,
              radius=56,
              thickness=5,
              start_angle=0,
              end_angle=360
          },
          {
              name='time',
              arg='%S',
              max=60,
              bg_colour=0xFFFFFF,
              bg_alpha=0.1,
              fg_colour=0xFFFFFF,
              fg_alpha=0.6,
              x=100, y=150,
              radius=62,
              thickness=5,
              start_angle=0,
              end_angle=360
          },
          {
              name='time',
              arg='%d',
              max=31,
              bg_colour=0xFFFFFF,
              bg_alpha=0.1,
              fg_colour=0xFFFFFF,
              fg_alpha=0.8,
              x=100, y=150,
              radius=70,
              thickness=5,
              start_angle=-90,
              end_angle=90
          },
          {
              name='time',
              arg='%m',
              max=12,
              bg_colour=0xFFFFFF,
              bg_alpha=0.1,
              fg_colour=0xFFFFFF,
              fg_alpha=1,
              x=100, y=150,
              radius=76,
              thickness=5,
              start_angle=-90,
              end_angle=90
          },
          {
              name='cpu',
              arg='cpu0',
              max=100,
              bg_colour=0xFFFFFF,
              bg_alpha=0.2,
              fg_colour=0xFFFFFF,
              fg_alpha=0.8,
              x=50, y=300,
              radius=25,
              thickness=5,
              start_angle=-90,
              end_angle=180
          },
          {
              name='memperc',
              arg='',
              max=100,
              bg_colour=0xFFFFFF,
              bg_alpha=0.2,
              fg_colour=0xFFFFFF,
              fg_alpha=0.8,
              x=75, y=350,
              radius=25,
              thickness=5,
              start_angle=-90,
              end_angle=180
          },
          {
              name='swapperc',
              arg='',
              max=100,
              bg_colour=0xFFFFFF,
              bg_alpha=0.2,
              fg_colour=0xFFFFFF,
              fg_alpha=0.8,
              x=100, y=400,
              radius=25,
              thickness=5,
              start_angle=-90,
              end_angle=180
          },
          {
              name='fs_used_perc',
              arg='/',
              max=100,
              bg_colour=0xFFFFFF,
              bg_alpha=0.2,
              fg_colour=0xFFFFFF,
              fg_alpha=0.8,
              x=125, y=450,
              radius=25,
              thickness=5,
              start_angle=-90,
              end_angle=180
          },
              {
              name='downspeedf',
              arg='wlan0',
              max=100,
              bg_colour=0xFFFFFF,
              bg_alpha=0.2,
              fg_colour=0xFFFFFF,
              fg_alpha=0.8,
              x=150, y=500,
              radius=25,
              thickness=4,
              start_angle=-90,
              end_angle=180
          },
              {
              name='upspeedf',
              arg='wlan0',
              max=100,
              bg_colour=0xFFFFFF,
              bg_alpha=0.2,
              fg_colour=0xFFFFFF,
              fg_alpha=0.8,
              x=150, y=500,
              radius=20,
              thickness=4,
              start_angle=-90,
              end_angle=180
          },
              {
              name='downspeedf',
              arg='eth0',
              max=100,
              bg_colour=0xFFFFFF,
              bg_alpha=0.2,
              fg_colour=0xFFFFFF,
              fg_alpha=0.8,
              x=150, y=500,
              radius=25,
              thickness=4,
              start_angle=-90,
              end_angle=180
          },
              {
              name='upspeedf',
              arg='eth0',
              max=100,
              bg_colour=0xFFFFFF,
              bg_alpha=0.2,
              fg_colour=0xFFFFFF,
              fg_alpha=0.8,
              x=150, y=500,
              radius=20,
              thickness=4,
              start_angle=-90,
              end_angle=180
          },
      }

      -- Use these settings to define the origin and extent of your clock.

      clock_r=65

      -- "clock_x" and "clock_y" are the coordinates of the centre of the clock, in pixels, from the top left of the Conky window.

      clock_x=100
      clock_y=150

      show_seconds=true

      require 'cairo'

      function rgb_to_r_g_b(colour,alpha)
          return ((colour / 0x10000) % 0x100) / 255., ((colour / 0x100) % 0x100) / 255., (colour % 0x100) / 255., alpha
      end

      function draw_ring(cr,t,pt)
          local w,h=conky_window.width,conky_window.height
         
          local xc,yc,ring_r,ring_w,sa,ea=pt['x'],pt['y'],pt['radius'],pt['thickness'],pt['start_angle'],pt['end_angle']
          local bgc, bga, fgc, fga=pt['bg_colour'], pt['bg_alpha'], pt['fg_colour'], pt['fg_alpha']

          local angle_0=sa*(2*math.pi/360)-math.pi/2
          local angle_f=ea*(2*math.pi/360)-math.pi/2
          local t_arc=t*(angle_f-angle_0)

          -- Draw background ring

          cairo_arc(cr,xc,yc,ring_r,angle_0,angle_f)
          cairo_set_source_rgba(cr,rgb_to_r_g_b(bgc,bga))
          cairo_set_line_width(cr,ring_w)
          cairo_stroke(cr)
         
          -- Draw indicator ring

          cairo_arc(cr,xc,yc,ring_r,angle_0,angle_0+t_arc)
          cairo_set_source_rgba(cr,rgb_to_r_g_b(fgc,fga))
          cairo_stroke(cr)       
      end

      function draw_clock_hands(cr,xc,yc)
          local secs,mins,hours,secs_arc,mins_arc,hours_arc
          local xh,yh,xm,ym,xs,ys
         
          secs=os.date("%S")   
          mins=os.date("%M")
          hours=os.date("%I")
             
          secs_arc=(2*math.pi/60)*secs
          mins_arc=(2*math.pi/60)*mins+secs_arc/60
          hours_arc=(2*math.pi/12)*hours+mins_arc/12
             
          -- Draw hour hand
         
          xh=xc+0.7*clock_r*math.sin(hours_arc)
          yh=yc-0.7*clock_r*math.cos(hours_arc)
          cairo_move_to(cr,xc,yc)
          cairo_line_to(cr,xh,yh)
         
          cairo_set_line_cap(cr,CAIRO_LINE_CAP_ROUND)
          cairo_set_line_width(cr,5)
          cairo_set_source_rgba(cr,1.0,1.0,1.0,1.0)
          cairo_stroke(cr)
         
          -- Draw minute hand
         
          xm=xc+clock_r*math.sin(mins_arc)
          ym=yc-clock_r*math.cos(mins_arc)
          cairo_move_to(cr,xc,yc)
          cairo_line_to(cr,xm,ym)
         
          cairo_set_line_width(cr,3)
          cairo_stroke(cr)
         
          -- Draw seconds hand
         
          if show_seconds then
              xs=xc+clock_r*math.sin(secs_arc)
              ys=yc-clock_r*math.cos(secs_arc)
              cairo_move_to(cr,xc,yc)
              cairo_line_to(cr,xs,ys)
         
              cairo_set_line_width(cr,1)
              cairo_stroke(cr)
          end
      end

      function conky_clock_rings()
          local function setup_rings(cr,pt)
              local str=''
              local value=0
             
              str=string.format('${%s %s}',pt['name'],pt['arg'])
              str=conky_parse(str)
             
              value=tonumber(str)
              pct=value/pt['max']
             
              draw_ring(cr,pct,pt)
          end
         
          -- Check that Conky has been running for at least 5s

          if conky_window==nil then return end
          local cs=cairo_xlib_surface_create(conky_window.display,conky_window.drawable,conky_window.visual, conky_window.width,conky_window.height)
         
          local cr=cairo_create(cs)   
         
          local updates=conky_parse('${updates}')
          update_num=tonumber(updates)
         
          if update_num>5 then
              for i in pairs(settings_table) do
                  setup_rings(cr,settings_table[i])
              end
          end
         
          draw_clock_hands(cr,clock_x,clock_y)
      end
Avatar do usuário
Patterson
 
Mensagens: 3
Registrado em: 31 Agosto, 2013

Re: Mostre o seu Desktop!

Mensagempor Tonao35 » Sex, 6 de Setembro 2013, 13:35



Avatar do usuário
Tonao35
 
Mensagens: 19
Registrado em: 20 Setembro, 2012

Re: Mostre o seu Desktop!

Mensagempor Wendell Barroso » Sex, 6 de Setembro 2013, 19:51

Simples
  • Sistema Operativo: Elementary 0.2 Luna
  • Tema: Mountain Lion eOS
  • Ambiente Gráfico: Pantheon

Avatar do usuário
Wendell Barroso
 
Mensagens: 18
Registrado em: 01 Maio, 2012

Re: Mostre o seu Desktop!

Mensagempor Claudio Novais » Sex, 6 de Setembro 2013, 23:04

BinaryBuntued
Avatar do usuário
Claudio Novais
Editor do Ubuntued
 
Mensagens: 16869
Registrado em: 25 Maio, 2011

Re: Mostre o seu Desktop!

Mensagempor orivaldirms » Sáb, 7 de Setembro 2013, 0:23

Claudio Novais (06-09-2013, 23:04) escreveu:


Muito bacana! :yeah:
Avatar do usuário
orivaldirms
 
Mensagens: 26
Registrado em: 09 Junho, 2013

Re: Mostre o seu Desktop!

Mensagempor Alessandra Vianna » Sáb, 7 de Setembro 2013, 0:48



Interessante o escudeto do Vitória lá em cima...
Avatar do usuário
Alessandra Vianna
 
Mensagens: 1443
Registrado em: 12 Janeiro, 2012
Localização: Rio de Janeiro - RJ, Brasil

Re: Mostre o seu Desktop!

Mensagempor Tonao35 » Sáb, 7 de Setembro 2013, 2:35

Alessandra Vianna, eu troquei o logo na pasta usr/share/unity/icons pelo logo do Vitoria
Avatar do usuário
Tonao35
 
Mensagens: 19
Registrado em: 20 Setembro, 2012

Re: Mostre o seu Desktop!

Mensagempor FileZ » Sáb, 7 de Setembro 2013, 7:11

KDE transparent


  • Sistema Operativo: Ubuntu 13.04
  • Tema: Oxigen Transparent
  • Ambiente Gráfico: KDE
  • Ícones: Faenza-Ambiance

FileZ
 
Mensagens: 18
Registrado em: 13 Julho, 2013

Re: Mostre o seu Desktop!

Mensagempor Rafael Schonberg » Sáb, 7 de Setembro 2013, 8:10

Está genial FileZ.
O homem não consegue descobrir novos oceanos se não tiver a coragem de perder de vista a costa. — André Gide
Avatar do usuário
Rafael Schonberg
 
Mensagens: 901
Registrado em: 19 Novembro, 2012

AnteriorPróximo

Voltar para Temas do Ubuntu

Quem está online

Usuários navegando neste fórum: Nenhum usuário registrado e 33 visitantes

cron