Bem-vindo: Sex, 29 de Março 2024, 6:01 Pesquisa avançada

Mostre o seu Desktop!

Apresente aqui temas que gostou, skins de programas, ícones, wallpapers, conky's, etc. Ou seja, tudo o que possa alterar de estético no seu Ubuntu, apresente aqui. Em caso de dúvidas de personalização ou se quiser mostrá-la ao mundo, utilize esta secção!

Re: Mostre o seu Desktop!

Mensagempor Luis Cardoso » Dom, 4 de Dezembro 2011, 22:39

anna kamilla » 04 Dez 2011, 02:59 escreveu:
sasuke

Spoiler:

  • Sistema Operativo: Ubuntu 10.04 LTS (Lucid Lynx)
  • Tema: dust
  • Ícones:icone faenza dark (Opcional)
  • Wallpaper: NARUTO_sasuke_doodle_by_ari1020.jpg
  • outros: awn dust, com lxde e firefox 8, esqueci de dizer o tema do emerald kaG2 Dark

Está muito fixe :yeah: Por acaso ia perguntar-lhe se o painel era o LXPanel, mas depois vi a referência ao LXDE :D

Apenas tenho umas pequenas sugestões:
  1. Indique os links para os temas (para ajudar os utilizadores que quiserem replicar esta sua personalização);
  2. (Opcional, já é mais a nível estético :lol: ) Pode colocar em outros tudo em separado como lhe mostrarei de seguida:

  • Sistema Operativo: Ubuntu 10.04 LTS (Lucid Lynx)
  • Tema: dust
  • Ícones: Faenza Dark (Opcional)
  • Wallpaper: NARUTO_sasuke_doodle_by_ari1020.jpg
  • outros:
    • AWN: dust
    • lxde
    • firefox 8
    • Tema do emerald: kaG2 Dark


Caso queira aplicar estas alterações, veja o seguinte spoiler com o código:
Spoiler:
Código: Selecionar todos
[list]
[*][b]Sistema Operativo:[/b] Ubuntu 10.04 LTS (Lucid Lynx)
[*][b]Tema:[/b] dust
[*][b]Ícones:[/b] [url=http://ubuntued.info/como-instalar-os-icones-faenza-via-repositorio-oficial]Faenza Dark[/url] (Opcional)
[*][b]Wallpaper:[/b] NARUTO_sasuke_doodle_by_ari1020.jpg
[*][b]outros:[/b]
[list]
[*][b][url=http://ubuntued.info/avant-window-navigator-awn-uma-dock-util]AWN[/url]:[/b] dust
[*][b]lxde[/b]
[*][b]firefox 8[/b]
[*][b]Tema do emerald:[/b] kaG2 Dark[/list][/list]
ImagemImagem
«Escolhe um trabalho de que gostes, e não terás que trabalhar um só dia na tua vida» - Confúcio
Avatar do usuário
Luis Cardoso
Redator
 
Mensagens: 10455
Registrado em: 26 Maio, 2011
Localização: Portugal

Re: Mostre o seu Desktop!

Mensagempor Hemersonm » Dom, 4 de Dezembro 2011, 22:45

Meu primeiro desktop postado aqui. espero que gostem. :D

Snow Sexy




:rox:
Editado pela última vez por Hemersonm em Dom, 4 de Dezembro 2011, 23:41, em um total de 2 vezes.
"Sonho com uma humanidade que morra através da síndrome de Cotard..."
Avatar do usuário
Hemersonm
 
Mensagens: 16
Registrado em: 04 Dezembro, 2011

Re: Mostre o seu Desktop!

Mensagempor tatuiano » Dom, 4 de Dezembro 2011, 23:42

Dominando o Mundo

  • Sistema Operativo:Ubuntu 11.1o gonme-shell
  • Tema:Delta shell Orange
  • Ícones:Buuf 3.2
  • Wallpaper:
  • Outros:Tema gtk Ambiance Dark Sidebar tema da janela Salinx gtk3 v1.1

tatuiano
 
Mensagens: 1
Registrado em: 04 Dezembro, 2011

Re: Mostre o seu Desktop!

Mensagempor Roger Braga » Seg, 5 de Dezembro 2011, 0:57

BLACKOPAL64

  • Sistema Operativo: Ubuntu 11.04 (Natty Narwhal)
  • Tema: GnomishDark
  • Ícones: AwOken
  • Wallpaper: http://img848.imageshack.us/img848/935/ozunity.png
  • AWN;
  • Cursor: BW3D;
  • Conky;
    conkyrc
    Spoiler:
    Código: Selecionar todos
    # — Conky settings — #
    background no
    update_interval 1

    gap_x 0
    gap_y 0

    cpu_avg_samples 2
    net_avg_samples 2

    override_utf8_locale yes

    double_buffer yes
    no_buffers yes

    text_buffer_size 2048
    imlib_cache_size 0

    temperature_unit fahrenheit

    # — Window specifications — #

    own_window yes
    own_window_type override
    own_window_transparent yes
    own_window_hints undecorated,sticky,skip_taskbar,skip_pager,below

    border_inner_margin 0
    border_outer_margin 0

    minimum_size 984 50
    maximum_width 784

    alignment tr
    gap_x 10
    gap_y 40

    # — Graphics settings — #
    draw_shades no
    draw_outline no
    draw_borders no
    draw_graph_borders no

    # — Text settings — #
    use_xft yes
    xftfont caviar dreams:size=8
    xftalpha 0.5

    uppercase yes

    own_window_transparent yes


    default_color BEBEBE

    # — Lua Load — #
       lua_load ./.conky/scripts/clock_rings1.lua
       lua_draw_hook_pre clock_rings

    TEXT

    ${voffset 8}${color BEBEBE}${font Prototype:size=16}${time %A}${font}${voffset -8}${goto 120}${color BEBEBE}${font Prototype:size=32}${time %d}${font}
    ${color BEBEBE}${voffset -10}${color D3D3D3}${font Prototype:size=18}${time %b}${font}${voffset -3} ${color BEBEBE}${font Prototype:size=20}${time %Y}${font}${color D3D3D3}${font Prototype}${hr}
    ${color BEBEBE}${font Prototype:size=8}${voffset -80}${goto 590}Distro: ${exec lsb_release -d -s} (${exec lsb_release -c -s})${font Prototype:size=8}
    ${goto 590}${font Prototype:size=8}${voffset 0}Kernel: $kernel $machine${font Prototype}
    ${goto 590}${font Prototype:size=8}${voffset 0}Uptime: $uptime_short${font Prototype}
    ${color BEBEBE}${goto 190}${voffset -30}${downspeedf eth0}
    ${color BEBEBE}${goto 190}${voffset -7}${upspeedf eth0}
    ${color D3D3D3}${goto 217}${voffset -55}net
    ${color BEBEBE}${goto 290}${voffset 2}${cpu cpu0}%
    ${color BEBEBE}${goto 290}${voffset -7}${cpu cpu1}%
    ${color D3D3D3}${goto 317}${voffset -55}cpu
    ${color BEBEBE}${goto 390}${voffset 2}${memperc}%
    ${color BEBEBE}${goto 390}${voffset -7}${swapperc}%
    ${color D3D3D3}${goto 412}${voffset -55}mem
    ${color BEBEBE}${goto 490}${voffset 2}${fs_used_perc /}%
    ${color BEBEBE}${goto 490}${voffset -7}${fs_used_perc /home/}%
    ${color D3D3D3}${goto 514}${voffset -55}hdd

















    clock_rings1.lua
    Spoiler:
    Código: Selecionar todos
    --[[
    Clock Rings by londonali1010 (2009) Edited by AleAngel

    This script draws percentage meters as rings, and also draws clock hands if you want! It is fully customisable; all options are described in the script. This script is based off a combination of my clock.lua script and my rings.lua script.

    IMPORTANT: if you are using the 'cpu' function, it will cause a segmentation fault if it tries to draw a ring straight away. The if statement on line 145 uses a delay to make sure that this doesn't happen. It calculates the length of the delay by the number of updates since Conky started. Generally, a value of 5s is long enough, so if you update Conky every 1s, use update_num>5 in that if statement (the default). If you only update Conky every 2s, you should change it to update_num>3; conversely if you update Conky every 0.5s, you should use update_num>10. ALSO, if you change your Conky, is it best to use "killall conky; conky" to update it, otherwise the update_num will not be reset and you will get an error.

    To call this script in Conky, use the following (assuming that you save this script to ~/scripts/rings.lua):
       lua_load ~/scripts/clock_rings.lua
       lua_draw_hook_pre clock_rings
       
    Changelog:
    + v1.0 -- Original release (30.09.2009)
       v1.1p -- jpope edit (05.10.2009)
       v1.2p -- jpope edit (06.10.2009)
       v1.3p -- jpope edit (10.10.2009)
    ]]

    settings_table = {
       {
          -- Edit this table to customise your rings.
          -- You can create more rings simply by adding more elements to settings_table.
          -- "name" is the type of stat to display; you can choose from 'cpu', 'memperc', 'fs_used_perc', 'battery_used_perc'.
          name='time',
          -- "arg" is the argument to the stat type, e.g. if in Conky you would write ${cpu cpu0}, 'cpu0' would be the argument. If you would not use an argument in the Conky variable, use ''.
          arg='%I.%M',
          -- "max" is the maximum value of the ring. If the Conky variable outputs a percentage, use 100.
          max=12,
          -- "bg_colour" is the colour of the base ring.
          bg_colour=0x9400D3,
          -- "bg_alpha" is the alpha value of the base ring.
          bg_alpha=0.2,
          -- "fg_colour" is the colour of the indicator part of the ring.
          fg_colour=0x9400D3,
          -- "fg_alpha" is the alpha value of the indicator part of the ring.
          fg_alpha=0.2,
          -- "x" and "y" are the x and y coordinates of the centre of the ring, relative to the top left corner of the Conky window.
          x=600, y=210,
          -- "radius" is the radius of the ring.
          radius=52,
          -- "thickness" is the thickness of the ring, centred around the radius.
          thickness=10,
          -- "start_angle" is the starting angle of the ring, in degrees, clockwise from top. Value can be either positive or negative.
          start_angle=0,
          -- "end_angle" is the ending angle of the ring, in degrees, clockwise from top. Value can be either positive or negative, but must be larger than start_angle.
          end_angle=360
       },
       {
          name='time',
          arg='%M.%S',
          max=60,
          bg_colour=0x9400D3,
          bg_alpha=0.2,
          fg_colour=0xBEBEBE,
          fg_alpha=0.4,
          x=600, y=210,
          radius=64,
          thickness=10,
          start_angle=0,
          end_angle=360
       },
       {
          name='time',
          arg='%S',
          max=60,
          bg_colour=0x9400D3,
          bg_alpha=0.2,
          fg_colour=0xBEBEBE,
          fg_alpha=0.6,
          x=600, y=210,
          radius=76,
          thickness=10,
          start_angle=0,
          end_angle=360
       },
       {
          name='time',
          arg='%d',
          max=31,
          bg_colour=0x9400D3,
          bg_alpha=0.2,
          fg_colour=0xBEBEBE,
          fg_alpha=0.8,
          x=600, y=210,
          radius=88,
          thickness=10,
          start_angle=-90,
          end_angle=89
       },
       {
          name='time',
          arg='%m',
          max=12,
          bg_colour=0x9400D3,
          bg_alpha=0.2,
          fg_colour=0xBEBEBE,
          fg_alpha=1,
          x=600, y=210,
          radius=100,
          thickness=10,
          start_angle=-90,
          end_angle=89
       },
       {
          name='time',
          arg='%w',
          max=6,
          bg_colour=0x9400D3,
          bg_alpha=0.2,
          fg_colour=0xBEBEBE,
          fg_alpha=0.8,
          x=600, y=210,
          radius=88,
          thickness=10,
          start_angle=90,
          end_angle=269
       },
       {
          name='time',
          arg='%U',
          max=52,
          bg_colour=0x9400D3,
          bg_alpha=0.2,
          fg_colour=0xBEBEBE,
          fg_alpha=1,
          x=600, y=210,
          radius=100,
          thickness=10,
          start_angle=90,
          end_angle=269
       },
             {
          name='downspeedf',
          arg='eth0',
          max=100,
          bg_colour=0x9400D3,
          bg_alpha=0.2,
          fg_colour=0xBEBEBE,
          fg_alpha=0.6,
          x=230, y=45,
          radius=35,
          thickness=10,
          start_angle=-90,
          end_angle=180
       },
            {
          name='upspeedf',
          arg='eth0',
          max=100,
          bg_colour=0x9400D3,
          bg_alpha=0.2,
          fg_colour=0xBEBEBE,
          fg_alpha=0.3,
          x=230, y=45,
          radius=23,
          thickness=10,
          start_angle=-90,
          end_angle=180
       },
       {
          name='cpu',
          arg='cpu0',
          max=100,
          bg_colour=0x9400D3,
          bg_alpha=0.2,
          fg_colour=0xBEBEBE,
          fg_alpha=0.6,
          x=330, y=45,
          radius=35,
          thickness=10,
          start_angle=-90,
          end_angle=180
       },
       {
          name='cpu',
          arg='cpu1',
          max=100,
          bg_colour=0x9400D3,
          bg_alpha=0.2,
          fg_colour=0xBEBEBE,
          fg_alpha=0.3,
          x=330, y=45,
          radius=23,
          thickness=10,
          start_angle=-90,
          end_angle=180
       },
       
       
       
       
       {
          name='memperc',
          arg='',
          max=100,
          bg_colour=0x9400D3,
          bg_alpha=0.2,
          fg_colour=0xBEBEBE,
          fg_alpha=0.6,
          x=430, y=45,
          radius=35,
          thickness=10,
          start_angle=-90,
          end_angle=180
       },
       {
          name='swapperc',
          arg='',
          max=100,
          bg_colour=0x9400D3,
          bg_alpha=0.2,
          fg_colour=0xBEBEBE,
          fg_alpha=0.4,
          x=430, y=45,
          radius=23,
          thickness=10,
          start_angle=-90,
          end_angle=180
       },
       {
          name='fs_used_perc',
          arg='/',
          max=100,
          bg_colour=0x9400D3,
          bg_alpha=0.2,
          fg_colour=0xBEBEBE,
          fg_alpha=0.6,
          x=530, y=45,
          radius=35,
          thickness=10,
          start_angle=-90,
          end_angle=180
       },
       {
          name='fs_used_perc',
          arg='/home/',
          max=100,
          bg_colour=0x9400D3,
          bg_alpha=0.2,
          fg_colour=0xBEBEBE,
          fg_alpha=0.3,
          x=530, y=45,
          radius=23,
          thickness=10,
          start_angle=-90,
          end_angle=180
       },
       

     

          
    }

    -- Use these settings to define the origin and extent of your clock.

    clock_r=100

    -- "clock_x" and "clock_y" are the coordinates of the centre of the clock, in pixels, from the top left of the Conky window.

    clock_x=600
    clock_y=210

    show_seconds=true

    require 'cairo'

    function rgb_to_r_g_b(colour,alpha)
       return ((colour / 0x10000) % 0x100) / 255., ((colour / 0x100) % 0x100) / 255., (colour % 0x100) / 255., alpha
    end

    function draw_ring(cr,t,pt)
       local w,h=conky_window.width,conky_window.height
       
       local xc,yc,ring_r,ring_w,sa,ea=pt['x'],pt['y'],pt['radius'],pt['thickness'],pt['start_angle'],pt['end_angle']
       local bgc, bga, fgc, fga=pt['bg_colour'], pt['bg_alpha'], pt['fg_colour'], pt['fg_alpha']

       local angle_0=sa*(2*math.pi/360)-math.pi/2
       local angle_f=ea*(2*math.pi/360)-math.pi/2
       local t_arc=t*(angle_f-angle_0)

       -- Draw background ring

       cairo_arc(cr,xc,yc,ring_r,angle_0,angle_f)
       cairo_set_source_rgba(cr,rgb_to_r_g_b(bgc,bga))
       cairo_set_line_width(cr,ring_w)
       cairo_stroke(cr)
       
       -- Draw indicator ring

       cairo_arc(cr,xc,yc,ring_r,angle_0,angle_0+t_arc)
       cairo_set_source_rgba(cr,rgb_to_r_g_b(fgc,fga))
       cairo_stroke(cr)      
    end

    function draw_clock_hands(cr,xc,yc)
       local secs,mins,hours,secs_arc,mins_arc,hours_arc
       local xh,yh,xm,ym,xs,ys
       
       secs=os.date("%S")   
       mins=os.date("%M")
       hours=os.date("%I")
          
       secs_arc=(2*math.pi/60)*secs
       mins_arc=(2*math.pi/60)*mins+secs_arc/60
       hours_arc=(2*math.pi/12)*hours+mins_arc/12
          
       -- Draw hour hand
       
       xh=xc+0.7*clock_r*math.sin(hours_arc)
       yh=yc-0.7*clock_r*math.cos(hours_arc)
       cairo_move_to(cr,xc,yc)
       cairo_line_to(cr,xh,yh)
       
       cairo_set_line_cap(cr,CAIRO_LINE_CAP_ROUND)
       cairo_set_line_width(cr,5)
       cairo_set_source_rgba(cr,0.2,0.6,1,0.4)
       cairo_stroke(cr)
       
       -- Draw minute hand
       
       xm=xc+clock_r*math.sin(mins_arc)
       ym=yc-clock_r*math.cos(mins_arc)
       cairo_move_to(cr,xc,yc)
       cairo_line_to(cr,xm,ym)
       
       cairo_set_line_width(cr,3)
       cairo_stroke(cr)
       
       -- Draw seconds hand
       
       if show_seconds then
          xs=xc+clock_r*math.sin(secs_arc)
          ys=yc-clock_r*math.cos(secs_arc)
          cairo_move_to(cr,xc,yc)
          cairo_line_to(cr,xs,ys)
       
          cairo_set_line_width(cr,1)
          cairo_stroke(cr)
       end
    end

    function conky_clock_rings()
       local function setup_rings(cr,pt)
          local str=''
          local value=0
          
          str=string.format('${%s %s}',pt['name'],pt['arg'])
          str=conky_parse(str)
          
          value=tonumber(str)
          pct=value/pt['max']
          
          draw_ring(cr,pct,pt)
       end
       
       -- Check that Conky has been running for at least 5s

       if conky_window==nil then return end
       local cs=cairo_xlib_surface_create(conky_window.display,conky_window.drawable,conky_window.visual, conky_window.width,conky_window.height)
       
       local cr=cairo_create(cs)   
       
       local updates=conky_parse('${updates}')
       update_num=tonumber(updates)
       
       if update_num>5 then
          for i in pairs(settings_table) do
             setup_rings(cr,settings_table[i])
          end
       end
       
       draw_clock_hands(cr,clock_x,clock_y)
    end


    function inca_draw_shadow(cr, radius, color, strength, radiusstart)
        local alpha = strength / radius
        cairo_set_source_rgba(cr, inca_rgb(color, alpha))
        cairo_set_line_join(cr, CAIRO_LINE_JOIN_ROUND)
        cairo_set_line_cap(cr, CAIRO_LINE_CAP_ROUND)
        local w, radiusstart = 0, radiusstart
        if radiusstart     ~= nil and radiusstart > 1 then
            radius = radius + radiusstart
        else
            radiusstart = 1
        end
        for w=radiusstart,radius,1 do
            cairo_set_line_width(cr, w)
            cairo_stroke_preserve(cr)
        end
    end

    function inca_draw_ring(cr, x, y, radius, width, ring)
        local value,valuemax = ring['value'], ring['valuemax']
        local angle1,angle2,angle3 = ring['angle1'], ring['angle2'], 0
        local color,alpha = settings['fgcolor'], ring['alpha']
        local alphasd = 0.3
           
        if ring['isparsable'] == true then
            value = conky_parse(value)
            if value == nil then return end
            value = tonumber(value)/valuemax
            value = math.max(0, math.min(1, value))
        else
            value = 1
            alphasd = 1
            color = settings['bgcolor']
        end
        angle3 = (angle2 - angle1)*value + angle1
        cairo_arc_negative(cr, x, y, radius, angle1*math.pi/180, angle3*math.pi/180)
        inca_draw_shadow(cr, 5, 0x000000, 0.60*alphasd, width + 1)
        cairo_set_source_rgba(cr, inca_rgb(color,alpha))
        cairo_set_line_width(cr, width)
        cairo_stroke(cr)
    end

    function inca_draw_line(cr, x1, y1, x2, y2, width, line)
        local value,valuemax = line['value'], line['valuemax']
        local color,alpha = settings['fgcolor'], line['alpha']
        local alphasd = 0.3
       
        if line['isparsable'] == true then
            value = conky_parse(value)
            if value == nil then return end
            value = tonumber(value)/valuemax
            value = math.max(0, math.min(1, value))
        else
            value = 1
            alphasd = 1
            color = settings['bgcolor']
        end
        local x = (1 - value)/2
        cairo_move_to(cr, x1 + x2*x, y1 + y2*x)
        cairo_rel_line_to(cr, x2*(1-x*2), y2*(1-x*2))
        cairo_close_path (cr)
        inca_draw_shadow(cr, 5, 0x000000, 0.60*alphasd, width + 1)
        cairo_set_source_rgba(cr, inca_rgb(color, alpha))
        cairo_set_line_width(cr, width)
        cairo_stroke(cr)
    end

    function inca_draw_job(cr, job)
        if job['job'] == 'text' then
            cairo_select_font_face(cr, job.font, CAIRO_FONT_SLANT_NORMAL, CAIRO_FONT_WEIGHT_BOLD)
            cairo_set_font_size(cr, job.size)
            cairo_move_to(cr, job['x'], job['y'])
            local str = job['str']
            if job['isparsable'] == true then
                str = conky_parse(str)
                if str == nil then return end
            end
            if job['isformatable'] ~= nil and job['isformatable'] == true then
                str = string.format(job['fmt'], str)
            end
            cairo_text_path(cr, str)
            inca_draw_shadow(cr, 5, 0x000000, 0.65)
            cairo_set_source_rgba(cr, inca_rgb(settings['fgcolor'], 1))
            cairo_fill(cr)
        elseif job['job'] == 'ring' then
            local x,y,radius = job['x'], job['y'], job['radius']
            local layers,width = job['layers'], job['width']
            for i in pairs(layers) do
                inca_draw_ring(cr, x, y, radius, width, layers[i])
            end
        elseif job['job'] == 'line' then
            local x1,y1,x2,y2 = job['x1'], job['y1'], job['x2'], job['y2']
            local layers,width = job['layers'], job['width']
            for i in pairs(layers) do
                inca_draw_line(cr, x1, y1, x2, y2, width, layers[i])
            end
        end
    end

    function conky_paint()
        if conky_window == nil then return end
        local cs = cairo_xlib_surface_create(conky_window.display,conky_window.drawable,conky_window.visual, conky_window.width,conky_window.height)
         local cr = cairo_create(cs)
        for i in pairs(jobs) do
            inca_draw_job(cr, jobs[i])
        end
    end

AGARB REGOR


Imagem
:ubuntued: "Somente seres humanos excepcionais e irrepreensíveis suscitam ideias generosas e ações elevadas. O conhecimento é limitado. A imaginação envolve ao mundo."
:ubuntued:
Avatar do usuário
Roger Braga
Mr. Deskmod
 
Mensagens: 755
Registrado em: 04 Julho, 2011
Localização: São Paulo, BRASIL

Re: Mostre o seu Desktop!

Mensagempor Di' stante » Seg, 5 de Dezembro 2011, 1:38

Hemersonm, parabéns, estreiastes com o pé direito: belíssimo desktop. :OK:
Avatar do usuário
Di' stante
 
Mensagens: 130
Registrado em: 24 Setembro, 2011

Re: Mostre o seu Desktop!

Mensagempor João Ferretti » Seg, 5 de Dezembro 2011, 1:55

Luis Cardoso » Dom Dez 04, 2011 6:06 pm escreveu:
João Ferretti » 04 Dez 2011, 21:47 escreveu:
José Craveiro escreveu:Está um conjunto muito elegante. :OK:
Falta só mesmo preparar melhor a apresentação do post através do "Prever" e ver o que não queremos que apareça. Mas gostei muito ;)

Obrigado José! É a primeira vez que posto um Desktop aqui! Eu já estava prevendo que não ia fazer direito! Na próxima vou seguir sua dica,obrigado.

É assim, eu não tenho como editar o seu tópico (só o Cláudio tem esse tipo de privilégio pois é ele o Administrador), por isso vou ver o seu tópico e corrigi-lo para você. Depois coloco aqui o código todo direitinho e o João Ferretti apenas terá de editar o seu tópico já com as correcções, :OK: ?

Obrigado Luis Cardoso! Já editei o post! Espero que eu não erre mais na hora de postar novamente. Um abraço! :obrigado:
Avatar do usuário
João Ferretti
 
Mensagens: 78
Registrado em: 01 Novembro, 2011
Localização: Lorena,SP,Brasil

Re: Mostre o seu Desktop!

Mensagempor João Ferretti » Seg, 5 de Dezembro 2011, 2:11

anna kamilla » Dom Dez 04, 2011 6:02 pm escreveu:lindo mesmo ferreti. gostei também do ambiente feminino da evil queen, agora o meu que nunca ninguém comenta.

Obrigado Anna! Já vi seus outros posts e são muito bonitos! parabéns.
Avatar do usuário
João Ferretti
 
Mensagens: 78
Registrado em: 01 Novembro, 2011
Localização: Lorena,SP,Brasil

Re: Mostre o seu Desktop!

Mensagempor Roger Braga » Seg, 5 de Dezembro 2011, 2:46

Female Flowers Ubuntu

  • Sistema Operativo: Ubuntu 11.04 (Natty Narwhal)
  • Tema: Prospero
  • Ícones: AwOken
  • Wallpaper: http://img51.imageshack.us/img51/4374/3 ... intern.jpg
  • AWN;
  • Cursor: Bold-Knob;
  • Covergloobus: Caledonia;
  • Conky;
    conkyrc
    Spoiler:
    Código: Selecionar todos
    # conky configuration

    background yes
    use_xft yes
    xftfont neuropol x free:size=10
    xftalpha 1
    update_interval 1.0
    total_run_times 0
    own_window yes
    own_window_transparent yes
    own_window_type override
    own_window_hints undecorated,below,sticky,skip_taskbar,skip_pager
    double_buffer yes
    minimum_size 400 400
    maximum_width 1600
    draw_shades no
    draw_outline no
    draw_borders no
    draw_graph_borders no
    default_color C71585
    default_shade_color black
    default_outline_color 000000
    alignment top_left
    gap_x 12
    gap_y 12
    no_buffers yes
    uppercase no
    cpu_avg_samples 2
    override_utf8_locale no
    ##############################################
    #  Output
    ##############################################
    TEXT
    SYSTEM INFO:
    ${font neuropol x free:size=10}Host: $nodename | ${font neuropol x free:size=10}RAM: $mem/$memmax | ${font neuropol x free:size=10}Disk usage: ${fs_used /}/${fs_size /} | ${font neuropol x free:size=10}CPU usage: ${cpu cpu0}% CPU1 usage: ${cpu cpu1}%




    ${font neuropol x free:bold:size=52}${time %H:%M:%S}
    ${font neuropol x free:bold:size=24}${time %A %d %B %Y} 

AGARB REGOR


Imagem
:ubuntued: "Somente seres humanos excepcionais e irrepreensíveis suscitam ideias generosas e ações elevadas. O conhecimento é limitado. A imaginação envolve ao mundo."
:ubuntued:
Avatar do usuário
Roger Braga
Mr. Deskmod
 
Mensagens: 755
Registrado em: 04 Julho, 2011
Localização: São Paulo, BRASIL

Re: Mostre o seu Desktop!

Mensagempor anna kamilla » Seg, 5 de Dezembro 2011, 3:19

Roger Braga » Seg Dez 05, 2011 2:46 am escreveu:
Female Flowers Ubuntu
Spoiler:


bonito vou baixar
Avatar do usuário
anna kamilla
 
Mensagens: 48
Registrado em: 12 Junho, 2011

Re: Mostre o seu Desktop!

Mensagempor Roger Braga » Seg, 5 de Dezembro 2011, 13:44

BLACK SWAN

  • Sistema Operativo: Ubuntu 11.04 (Natty Narwhal)
  • Tema: Orta
  • Ícones: area.o43 SVG Icon theme
  • Wallpaper: http://img23.imageshack.us/img23/6307/1680c.png
  • AWN;
  • Cursor: Bold-Knob;
  • Covergloobus: Corner;
  • Conky;
    conkyrc
    Spoiler:
    Código: Selecionar todos
    # Conky, a system monitor, based on torsmo
    #
    # Any original torsmo code is licensed under the BSD license
    #
    # All code written since the fork of torsmo is licensed under the GPL
    #
    # Please see COPYING for details
    #
    # Copyright (c) 2004, Hannu Saransaari and Lauri Hakkarainen
    # Copyright (c) 2005-2010 Brenden Matthews, Philip Kovacs, et. al. (see AUTHORS)
    # All rights reserved.
    #
    # This program is free software: you can redistribute it and/or modify
    # it under the terms of the GNU General Public License as published by
    # the Free Software Foundation, either version 3 of the License, or
    # (at your option) any later version.
    #
    # This program is distributed in the hope that it will be useful,
    # but WITHOUT ANY WARRANTY; without even the implied warranty of
    # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
    # GNU General Public License for more details.
    # You should have received a copy of the GNU General Public License
    # along with this program.  If not, see <http://www.gnu.org/licenses/>.
    #

    alignment top_Right
    background no
    border_width 1
    cpu_avg_samples 2
    default_color white
    default_outline_color black
    default_shade_color white
    draw_borders no
    draw_graph_borders yes
    draw_outline no
    draw_shades no
    use_xft yes
    xftfont Ubuntu regular:size=10
    gap_x 20
    gap_y 138
    minimum_size 5 5
    net_avg_samples 2
    no_buffers yes
    out_to_console no
    out_to_stderr no
    extra_newline no
    own_window no
    own_window_class Conky
    own_window_type desktop
    stippled_borders 0
    update_interval 1.0
    uppercase no
    use_spacer none
    show_graph_scale no
    show_graph_range no
    double_buffer yes

    TEXT
    ${color #cc6633} ${font Courier-New:size=30}$alignc${time %H:%M:%S}
    ${color black}${font Courier-New:bold:size=12}$alignc${time %A} ${font Courier-New:bold:size=12}$alignc${time %d %b. %Y}

    $alignc${color black}${font Courier-New:size=12}wrong5tep
    ${font}
    ${font Arial:bold:size=10}${color #cc6633}SYSTEM ${color black} ${hr 2}

    $font${color black}${font Courier-New:size=10}$sysname $kernel $alignr $machine
    Intel Pentium 4 $alignr${freq_g cpu0}Ghz
    Uptime $alignr${uptime}
    File System $alignr${fs_type}

    ${font Arial:bold:size=10}${color #cc6633}MEMORY ${color black}${hr 2}

    ${font Courier-new:size=10}${color black}MEM $alignc $mem / $memmax $alignr $memperc%
    ${color black}$membar

    ${font Arial:bold:size=10}${color #cc6633}CPU ${color black}${hr 2}

    ${font courier-new:size=10}${color black}${cpu}% ${cpubar}

    ${font Arial:bold:size=10}${color #cc6633}HDD ${color black}${hr 2}

    ${font Courier-new:size=10}${color black}/home $alignc ${fs_used /home} / ${fs_size /home} $alignr ${fs_free_perc /home}%
    ${color black}${fs_bar /home}

    ${font Arial:bold:size=10}${color #cc6633}NETWORK ${color Black}${hr 2}

    $font${color black}${font Courier-New:size=10}IP on eth0 $alignr ${addr eth0}

    ${color black}Down $alignr ${downspeed eth0} kb/s
    ${color black}Up $alignr ${upspeed eth0} kb/s

    ${color black}Downloaded: $alignr  ${totaldown eth0}
    Uploaded: $alignr  ${totalup eth0}

    ${font Arial:bold:size=10}${color #cc6633}TOP PROCESSES ${color black}${hr 2}

    ${color black}${font Courier-new:size=10}${top_mem name 2}${alignr}${top mem 2} %
    ${top_mem name 3}${alignr}${top mem 3} %
    ${top_mem name 4}${alignr}${top mem 4} %
    ${top_mem name 5}${alignr}${top mem 5} %

AGARB REGOR


Imagem
:ubuntued: "Somente seres humanos excepcionais e irrepreensíveis suscitam ideias generosas e ações elevadas. O conhecimento é limitado. A imaginação envolve ao mundo."
:ubuntued:
Avatar do usuário
Roger Braga
Mr. Deskmod
 
Mensagens: 755
Registrado em: 04 Julho, 2011
Localização: São Paulo, BRASIL

AnteriorPróximo

Voltar para Temas do Ubuntu

Quem está online

Usuários navegando neste fórum: Nenhum usuário registrado e 40 visitantes

cron