Bem-vindo: Sex, 26 de Maio 2017, 14:03 Pesquisa avançada

Partilhe aqui configurações do Conky!!

Apresente aqui temas que gostou, skins de programas, ícones, wallpapers, conky's, etc. Ou seja, tudo o que possa alterar de estético no seu Ubuntu, apresente aqui. Em caso de dúvidas de personalização ou se quiser mostrá-la ao mundo, utilize esta secção!

Partilhe aqui configurações do Conky!!

Mensagempor Claudio Novais » Qua, 6 de Julho 2011, 19:40

Este tópico tem o simples objetivo de partilhar com a comunidade configurações de Conkys que você conheça! Com isto quero simplesmente convidá-lo a participar sempre que conhecer uma nova Configuração do Conky! :yeah:

Para ter uma boa organização do tópico, é importante que haja algumas regras que se deve regir ao partilhar uma nova configuração:
  • Inclua sempre uma imagem ilustrativa do resultado do conky. Se precisar de ajuda veja este tópico.
  • Inclua sempre a configuração do conky dentro de spoilers e preferencialmente dentro da tag CODE, ou seja, desta forma:
    Código: Selecionar todos
    [spoiler][code]
    Configurações
    [/code][/spoiler]
  • Cada spoiler deverá ter apenas um ficheiro de configuração. Assim, se o seu conky usa mais que um ficheiro de configuração, use e abuse de spoilers! Use um para cada ficheiro de configuração!
  • Caso o ficheiro tenha autor, divulgue! Divulgue sempre ou o nome ou o link original, devemos dar relevo à criatividade de cada um.
  • Se acha que existe pormenores que devem ser referidos, refira-os sempre que puder! Assim os utilizadores que fizerem uso do seu contributo sentir-se-ão mais confiantes e terão certamente melhores resultados!

Por fim, salienta-se apenas que este tópico serve exclusivamente para partilha de Configurações do Conky, no entanto, se você tem alguma dúvida sobre algum conky apresentado, não hesite em questionar neste mesmo tópico! Certamente será ajudado e conseguirá resolver os seus problemas! ;)
Avatar do usuário
Claudio Novais
Editor do Ubuntued
 
Mensagens: 16869
Registrado em: 25 Maio, 2011

Re: Configurações Conky

Mensagempor Roger Braga » Qui, 21 de Julho 2011, 14:33

Estou postando o conky do relógio do tema Mortal dark (citando que o conky aqui foi feito pelo usuário olgmen do ubuntu ru )
Imagen

.conkyrc6
Spoiler:
# --- параметры окна ---
# эти строки необходимы для нормальной работы лучше не изменять
own_window yes
own_window_class desktop #Conky
own_window_transparent yes
own_window_type override
own_window_hints undecorated,below,sticky,skip_taskbar,skip_pager
# следующие параметры можно изменять
# минимальный размер
minimum_size 300 0
# минимальная ширина
maximum_width 400
# --- расположение окна
# левый верхний угол экрана
#alignment top_left
# левый нижний угол экрана
#alignment bottom_left
# правый верхний угол экрана
alignment top_right
# правый нижний угол экрана
#alignment bottom_right
# расстояние между кромкой экрана и окном
# по горизонтали
gap_x 20
# по вертикали
gap_y 25

# --- графика окна ---
# если желаете выводить conky на другом фоне напишите yes
background no
# окантовка окна, бордюр
draw_borders no
# если бордюр yes
# длина штрихов бордюра, если 0, то бордюр выводится сплошной линией
stippled_borders 1
# толщина линий бордюра
border_width 1
# бордюр вокруг выводимых графиков
draw_graph_borders no
# включить тень?
draw_shades no
# окантовка вокруг текста и выводимых объектов
draw_outline no
# Добавить пробел? Только для встраиваемых объектов
use_spacer right

# --- цвет ---
# основной цвет по умолчанию
default_color 00BFFF #DeepSkyBlue
# цвет тени
default_shade_color black
# цвет окантовки
default_outline_color black
# дополнительные
color1 white
color2 yellow
color3 red

# --- шрифты ---
# используемые шрифты X когда Xft не используется, можно выбрать один из следующих
#font 5x7
#font 6x10
#font 7x13
#font 8x13
#font 9x15
#font *mintsmild.se*
#font -*-*-*-*-*-*-34-*-*-*-*-*-*-*

# Используется ли Xft?
use_xft yes

# Шриф Xft когда Xft доступен, здесь можно ввести название и размер любого шрифта
xftfont Liberation mono:size=9

# яркость шрифта при испоьзовании шрифтов Xft
xftalpha 1
# выводить весь текст прописными буквами
uppercase no
# использовать кодировку UTF8? ПРИМЕЧАНИЕ: требуется Xft
override_utf8_locale yes

# --- следующие данные необходимы для работы
# обновление в секундах не имеет смысла ставить больше 2
# при выводе времени в секундах необходимо значение 1 и менее
update_interval 0.5
# время работы программы до её выключения
# установите 0 для работы программы без остановки
total_run_times 0
# двойная буфферизация (требуется для flicker, может не работать)
double_buffer yes
# вычитать буферизацию файловой системы из используемой памяти?
no_buffers yes
# количество cpu
cpu_avg_samples 2
# number of net samples to average
net_avg_samples 2
imlib_cache_size 0
short_units yes
pad_percents 2
text_buffer_size 2048
imlib_cache_size 0
#--- LUA ---
lua_load ~/scripts/olgmen4_1.lua
lua_draw_hook_pre widgets
TEXT
${voffset 10}${goto 55}${color 009cff}${font Zekton:bold:size=7}CPU 1${goto 95}${cpu cpu1}${goto 120}%
${goto 55}${color 00ff00}CPU 2${goto 95}${cpu cpu2}${goto 120}%
${voffset 5}${goto 95}${color ffffff}${font Zekton:bold:size=20}${time %H:%M:%S}
${voffset -14}${goto 180}${color ffff00}${font Zekton:bold:size=7}${upspeed eth0}${goto 220}UP
${voffset 1}${goto 180}${color ff0000}${downspeed eth0}${goto 220}DOWN
${voffset -5}

olgmen4_1.lua (colocar na pasta home/usuário/scripts
Spoiler:
-[[
Собрал все это Борис Кринкель <olgmen> krinkel@rambler.ru

Для этого серипта требуется CONKY версии 1.7.2 и выше

Все данные подогнаны под выставленные размеры. При необходимости изменить какие-нибудь данные возможно потребуется подгонка.

Для вызова этого скрипта в Conky вставьте следующие строки до TEXT (при условии, что скрипт сохранен в ~/scripts

lua_load ~/scripts/olgmen4_1.lua
lua_draw_hook_pre widgets
]]

-- функция перекодировки цвета для всего скрипта

require 'cairo'
function rgb_to_r_g_b(colour,alpha)
return ((colour / 0x10000) % 0x100) / 255., ((colour / 0x100) % 0x100) / 255., (colour % 0x100) / 255., alpha
end

--[[ Вывод фона и горизонтальных линий ]]

function body(cr, x, y, h, w, bgc, bga)

-- рисуем фон

cairo_move_to(cr, x, y)
cairo_line_to(cr, x + w - h, y)
cairo_arc(cr, x + w - h, y + h, h, -math.pi/2,0)
cairo_line_to(cr, x + w, y + h)
cairo_line_to(cr, x + h, y + h)
cairo_arc(cr, x + h, y, h, math.pi/2, math.pi)
cairo_line_to(cr, x, y + h)
cairo_close_path(cr)

cairo_set_source_rgba(cr,rgb_to_r_g_b(bgc,bga))
cairo_fill(cr)

-- горизонтальные линии

cairo_set_line_width (cr, 10.5) -- толщина линий

cairo_set_source_rgba(cr, 0, 0.4, 1, 1) -- синяя
cairo_move_to(cr, x + h*1.1, y + h*0.1)
cairo_line_to(cr, x + w - h, y + h*0.1)
cairo_stroke(cr)

cairo_set_source_rgba(cr, 0, 1, 0, 1) -- зеленая
cairo_move_to(cr, x + h*1.1, y + h*0.23)
cairo_line_to(cr, x + w - h, y + h*0.23)
cairo_stroke(cr)

cairo_set_source_rgba(cr, 1, 1, 0, 1) -- желтая
cairo_move_to(cr, x + h, y + h*0.75)
cairo_line_to(cr, x + w - h*1.1, y + h*0.75)
cairo_stroke(cr)

cairo_set_source_rgba(cr, 1, 0, 0, 1) -- красная
cairo_move_to(cr, x + h, y + h*0.88)
cairo_line_to(cr, x + w - h*1.1, y + h*0.88)
cairo_stroke(cr)

end
--[[ Конец вывода фона ]]
-- --------------------------------------------------------------------------
--[[ Вывод дуговых эквалайзеров ]]

function gradient_ring(cr, xc, yc, name, arg, max, bgc, bga, fgc, fga, ring_i, ring_o, frac, t, sa, ea)

-- функция вывода делений эквалайзера

local function draw_gradient_ring(pct)

local angle_0=(sa+180)*(2*math.pi/360)-math.pi/2
local angle_f=(ea+180)*(2*math.pi/360)-math.pi/2
local pct_arc=pct*(angle_f-angle_0)

local i = 0
-- деления выводим через 2 градуса
local winkel = math.rad(2)
-- коеффициент перерасчета
if name == "downspeedf" then koef = max/30
else koef = max/2
end

-- выводим 45 делений для фона
for i=0,44,1 do
-- толщина делений 2 пикселя
cairo_set_line_width(cr,2)
-- задаем цвет для фона
cairo_set_source_rgba(cr,rgb_to_r_g_b(bgc,bga))
-- координаты начальных точек
cairo_move_to(cr, xc-math.cos(angle_0+winkel*i)*ring_i, yc-math.sin(angle_0+winkel*i)*ring_i)
-- выводим деления
cairo_line_to(cr, xc-math.cos(angle_0+winkel*i)*(ring_i*0.9), yc-math.sin(angle_0+winkel*i)*(ring_i*0.9))
cairo_stroke(cr)
end

-- эквалайзер, количество выводимых делений зависит от величины параметра
for i=0,pct_arc*koef,1 do
-- толщина линий 2 пикселя
cairo_set_line_width(cr,2)
-- задаем цвет эквалайзера
cairo_set_source_rgba(cr,rgb_to_r_g_b(fgc,fga))
-- координаты начальных точек
cairo_move_to(cr, xc-math.cos(angle_0+winkel*i)*ring_i, yc-math.sin(angle_0+winkel*i)*ring_i)
-- выводим деления
cairo_line_to(cr, xc-math.cos(angle_0+winkel*i)*(ring_i*0.9), yc-math.sin(angle_0+winkel*i)*(ring_i*0.9))
cairo_stroke(cr)
end
end

-- вывод делений

local function setup_gradient_ring()
local str = ''
local value = 0

-- забираем данные из ОС

str = string.format('${%s %s}', name, arg)
str = conky_parse(str)
value = tonumber(str)

if value == nil then value = 0 end
pct = value/max
draw_gradient_ring(pct)
end

local updates=conky_parse('${updates}')
update_num=tonumber(updates)

if update_num>5 then setup_gradient_ring() end
end
--end
--[[ END GRADIENT RING WIDGET ]]
-- -------------------------------------------------------------------------------------
function conky_widgets()
if conky_window == nil then return end
local cs = cairo_xlib_surface_create(conky_window.display, conky_window.drawable, conky_window.visual, conky_window.width, conky_window.height)
-- -------------------------------------------------------------------------------------
-- выводим фон
cr = cairo_create(cs)
body(cr, 5, 10, 125, 300, 0x000000, 0.4)
cairo_destroy(cr)
-- выводим эквалайзер
cr = cairo_create(cs)
gradient_ring(cr, 180, 133, 'cpu', 'cpu1', 100, 0x9999aa, 0.5, 0x0000ff, 1, 116, 98, 10, 4, 0, 90)
gradient_ring(cr, 180, 133, 'cpu', 'cpu2', 100, 0x9999aa, 0.5, 0x00ff00, 1,99, 98, 10, 4, 0, 90)
gradient_ring(cr, 130, 10, 'upspeedf', 'eth0', 100, 0x9999aa, 0.5, 0xffff00, 1,99, 98, 10, 4, 180, 265)
gradient_ring(cr, 130, 10, 'downspeedf', 'eth0', 1000, 0x9999aa, 0.5, 0xff0000, 1,116, 98, 10, 4, 180, 265)
cairo_destroy(cr)
end
Não equecer que esta para configuração 1680x1050 no caso de monitores maiores ou menores altera valo x= e y= .
Editado pela última vez por Roger Braga em Sáb, 23 de Julho 2011, 2:30, em um total de 4 vezes.

AGARB REGOR


Imagem
:ubuntued: "Somente seres humanos excepcionais e irrepreensíveis suscitam ideias generosas e ações elevadas. O conhecimento é limitado. A imaginação envolve ao mundo."
:ubuntued:
Avatar do usuário
Roger Braga
Mr. Deskmod
 
Mensagens: 755
Registrado em: 04 Julho, 2011
Localização: São Paulo, BRASIL

Re: Configurações Conky

Mensagempor Roger Braga » Qui, 21 de Julho 2011, 15:06

Etou postando um conkycolors espero que gostem.
Imagen

conkyrc
Spoiler:
##################################
## VinDSL | rev. 10-12-30 20:45 ##
##################################

####
## Use XFT? Required to Force UTF8 (see below).
#
use_xft yes
xftfont LiberationSans:size=8.85
xftalpha 0.7
text_buffer_size 2048

####
## Force UTF8? Requires XFT (see above).
## Displays degree symbol, instead of °, etc.
#
override_utf8_locale yes

####
## Update interval in seconds.
#
update_interval 1.0

####
## This is the number of times Conky will update before quitting.
## Set to zero to run forever.
#
total_run_times 0

####
## Create own window instead of using desktop (required in nautilus)?
#
own_window yes
#own_window_colour eeeeee
own_window_type override
own_window_transparent yes

###########################
##own_window yes
##own_window_colour eeeeee
##own_window_type override
##own_window_transparent yes
##own_window_argb_visual yes
###########################

####
## Use double buffering? Reduces flicker.
#
double_buffer yes

####
## Draw shades?
#
draw_shades no

####
## Draw outlines?
#
draw_outline no

####
## Draw borders around text?
#
draw_borders no

####
## Draw borders around graphs?
#
draw_graph_borders no

####
## Print text to stdout?
## Print text in console?
#
out_to_ncurses no
out_to_console no

####
## Text alignment.
#
alignment top_right

####
## Minimum size of text area.
#
minimum_size 235 0

####
## Gap between text and screen borders.
#
gap_x 10
gap_y 13

####
## Shorten MiB/GiB to M/G in stats.
#
short_units yes

####
## Pad % symbol spacing after numbers.
#
pad_percents 0

####
## Pad spacing between text and borders.
#
border_inner_margin 4

####
## Limit the length of names in "Top Processes".
#
top_name_width 10

####
## Subtract file system -/+buffers/cache from used memory?
## Set to yes, to produce meaningful physical memory stats.
#
no_buffers yes

####
## Set to yes, if you want all text to be in UPPERCASE.
#
uppercase no

####
## Number of cpu samples to average.
## Set to 1 to disable averaging.
#
cpu_avg_samples 2

####
## Number of net samples to average.
## Set to 1 to disable averaging.
#
net_avg_samples 2

####
## Add spaces to keep things from moving around?
## Only affects certain objects.
#
use_spacer right

draw_graph_borders yes

####
## My colors (suit yourself).
#
color0 White
color1 Ivory
color2 Ivory2
color3 Ivory3
color4 EE6600
color5 Tan2
color6 white
color7 AntiqueWhite4
color8 059EFA #DarkSlateGray
color9 red

####
## Load Lua for shading (optional).
## Set the path to your script here.
#
lua_load ~/.conkycolors/combined.lua
lua_load ~/.conkycolors/bargraph.lua
lua_draw_hook_pre combined
lua_draw_hook_post main_bars



####
## Installed fonts (required).
#
# ConkyWeather (Stanko Metodiev)
# ConkyWindNESW (Stanko Metodiev)
# Cut Outs for 3D FX (Fonts & Things)
# Liberation Mono (Ascender Corp)
# Liberation Sans (Ascender Corp)
# Moon Phases (Curtis Clark)
# OpenLogos (Icoma)
# PizzaDude Bullets (Jakob Fischer)
# Radio Space (Iconian Fonts)
# StyleBats (Vinterstille)
# Ubuntu (Canonical Ltd)
# Ubuntu Title Bold (Paulo Silva)
# Weather (Jonathan Macagba)
# WenQuanYi Micro Hei (Google Corp)

TEXT
##################
## LOGO ##
##################
#${voffset -33}${font OpenLogos:size=103}${color2}v${font}${voffset -76}${goto 178}${font UbuntuTitleBold:size=20}${color4}10.10${font}
##################
## SYSTEM ##
##################
${voffset 20}${font Ubuntu:bold:size=10}${color4}SYSTEM${offset 8}${color8}${voffset -2}${hr 2}${font}
${voffset 5}${font StyleBats:size=10}${color2}k${voffset -4}${font}${color6}${offset 5}${sysname}${offset 5}${kernel}${alignr}${machine}
${voffset 2}${font StyleBats:size=10}${color2}2${voffset -1}${font}${color6}${offset 5}Hostname${alignr}${nodename}
${voffset 2}${font StyleBats:size=10}${color2}A${voffset -1}${font}${color6}${offset 5}INTEL${offset 3}COREO2${offset 3}E6400${offset 3}Edition${alignr}${freq_g cpu0}${offset 1}GHz
${voffset 2}${font StyleBats:size=10}${color2}M${voffset -1}${font}${color6}${offset 5}RAM${alignr}${memmax}
${voffset 2}${font StyleBats:size=10}${color2}q${voffset -1}${font}${color6}${offset 5}Uptime${alignr}${uptime}
${voffset 2}${font StyleBats:size=10}${color2}o${voffset -1}${font}${color6}${offset 5}File${offset 3}System${alignr}${fs_type}
${voffset 2}${font StyleBats:size=10}${color2}b${voffset -1}${font}${color6}${offset 5}Updates${alignr}${execi 5 aptitude search "~U" | wc -l | tail}
${font}
##################
## CPU ##
##################
${voffset 5}${font StyleBats:size=10}${color 0A86F2}A${voffset -2}${font}${offset 2}Core1${offset 5}${cpu cpu0}%${color}${color7}${alignr 2}${if_match ${cpu}<=50}${color green}${else}${if_match ${cpu}<=70}${color orange}${else}${if_match ${cpu}>70}${color red}${endif}${endif}${endif}
${voffset 2}${font StyleBats:size=10}${color 41C902}A${voffset -2}${font}${offset 2}Core2${offset 5}${cpu cpu1}%${color}${color7}${alignr 2}${if_match ${cpu}<=50}${color green}${else}${if_match ${cpu}<=70}${color orange}${else}${if_match ${cpu}>70}${color red}${endif}${endif}${endif}
${font}
${voffset 4}${font StyleBats:size=10}${color 8159F0}l${voffset -2}${font}${offset 3}RAM${offset 5}${memperc}%${color}
${font}
${voffset 4}${font StyleBats:size=10}${color 00FF00}x${voffset -2}${font}${offset 4}ROOT${color}
${fs_used /}${offset 3}/${offset 3}${fs_size /}${offset 5}${if_match ${fs_used_perc /}<=60}${color green}${else}${if_match ${fs_used_perc /}<=85}${color orange}${else}${if_match ${fs_used_perc /}>85}${color red}${endif}${endif}${endif}${fs_free_perc /}%
${voffset 1}${font StyleBats:size=10}${color 00CC00}x${voffset -2}${font}${offset 4}HOME${color}
${fs_used /home}${offset 3}/${offset 3}${fs_size /home}${offset 5}${if_match ${fs_used_perc /home}<=60}${color green}${else}${if_match ${fs_used_perc /home}<=85}${color orange}${else}${if_match ${fs_used_perc /home}>85}${color red}${endif}${endif}${endif}${fs_free_perc /home}%
##################
# TOP PROCESSES ##
##################
${voffset 3}${font Ubuntu:bold:size=10}${color4}TOP PROCESSES${offset 8}${color8}${voffset -2}${hr 2}${font}
${voffset 4}${font StyleBats:size=10}${color1}h${voffset -3}${font}${color9}${offset 5}${top_mem name 1}${goto 115}${top_mem mem_res 1}${alignr}${top_mem mem 1}%
${voffset 2}${font StyleBats:size=10}${color1}h${voffset -3}${font}${color6}${offset 5}${top_mem name 2}${goto 115}${top_mem mem_res 2}${alignr}${top_mem mem 2}%
${voffset 2}${font StyleBats:size=10}${color1}h${voffset -3}${font}${color6}${offset 5}${top_mem name 3}${goto 115}${top_mem mem_res 3}${alignr}${top_mem mem 3}%
${voffset 2}${font StyleBats:size=10}${color1}h${voffset -3}${font}${color6}${offset 5}${top_mem name 4}${goto 115}${top_mem mem_res 4}${alignr}${top_mem mem 4}%
${voffset 2}${font StyleBats:size=10}${color1}h${voffset -3}${font}${color6}${offset 5}${top_mem name 5}${goto 115}${top_mem mem_res 5}${alignr}${top_mem mem 5}%
Processes: ${alignr}${processes}
Running: ${alignr}${running_processes}
##################
## NETWORK ##
##################
${voffset 6}${font Ubuntu:bold:size=10}${color4}NETWORK${offset 8}${color8}${voffset -2}${hr 2}${font}
${voffset 4}${font PizzaDudeBullets:size=10}${color2}a${font}${color6}${offset 5}Private${offset 3}IP${alignr}${addrs eth0}
${font PizzaDudeBullets:size=10}${color2}a${font}${color6}${offset 5}Public${offset 7}IP${alignr}${execi 1800 wget -q -O - checkip.dyndns.org | sed -e 's/[^[:digit:]\|.]//g'}

Interface:${alignr}eth0
Signal Strength:${alignr}${wireless_link_qual_perc eth0}%
Bitrate:${alignr}${wireless_bitrate eth0}
Network:${alignr}${wireless_essid eth0}
Mode:${alignr}${wireless_mode eth0}

${voffset 4}${font PizzaDudeBullets:size=10}${color2}T${font}${color6}${offset 5}Down${alignr}${downspeed eth0}
${downspeedgraph eth0 20,262 ffffff ffffff 750 }
${font PizzaDudeBullets:size=10}${color2}N${font}${color6}${offset 5}Up${alignr}${upspeed eth0}
${upspeedgraph eth0 20,262 ffffff ffffff 750 }${font}
##################
## TIME ##
##################
${voffset 6}${font Ubuntu:bold:size=10}${color4}TIME${offset 8}${color8}${voffset -2}${hr 2}${font}
${voffset 3}${voffset -4}${font Tahoma:size=32}${color3}${alignc 7}${time %k:%M}${font}
##################
## CALENDAR ##
##################
${voffset 6}${font Ubuntu:bold:size=10}${color4}DATE${offset 8}${color8}${voffset -2}${hr 2}${font}
${voffset 18}${font LiberationMono:size=8}${color3}${alignc 77}${time %A}${font}
${voffset -3}${font LiberationMono:size=22}${color4}${alignc 77}${time %d}${font}
${voffset -1}${font LiberationMono:size=8}${color3}${alignc 77}${time %B}${font}
${voffset -3}${font LiberationMono:size=8}${color3}${alignc 77}${time %Y}${font}
${voffset -79}${font CutOutsFor3DFX:size=64}${color3}${alignc 115}2${font}
${voffset -69}${font LiberationMono:size=8}${color3}${execpi 1800 VinDSL_Cal_4= cal | sed '1d' | sed s/^/"\$\{offset 97"\}/ | sed '/^ *$/d' | sed 's/\<'"$(date +%-d)"'\>/${color4}&${color3}/'}${font}

combined.lua
Spoiler:
--[[
This script combines the background drawing lua script and the ring drawing lua script
To call this script in Conky, use the following (assuming that you save this script to ~/scripts/combined.lua):
lua_load ~/scripts/combined.lua
lua_draw_hook_pre combined
]]
--SETTINGS FOR BACKGROUND #######################################################################
-- Change these settings to affect your background:

-- "corner_r" is the radius, in pixels, of the rounded corners. If you don't want rounded corners, use 0.
corner_r = 100

-- Set the colour and transparency (alpha) of your background.
bg_colour = 0x000000
bg_alpha = 0.55

-- Tweaks the height of your background, in pixels. If you don't need to adjust the height, use 0.
vindsl_hack_height = -175
--##################################################################################################
--[[
Ring Meters by londonali1010 (2009)

This script draws percentage meters as rings. It is fully customisable; all options are described in the script.

IMPORTANT: if you are using the 'cpu' function, it will cause a segmentation fault if it tries to draw a ring straight away. The if statement on line 145 uses a delay to make sure that this doesn't happen. It calculates the length of the delay by the number of updates since Conky started. Generally, a value of 5s is long enough, so if you update Conky every 1s, use update_num > 5 in that if statement (the default). If you only update Conky every 2s, you should change it to update_num > 3; conversely if you update Conky every 0.5s, you should use update_num > 10. ALSO, if you change your Conky, is it best to use "killall conky; conky" to update it, otherwise the update_num will not be reset and you will get an error.

Changelog:
+ v1.2.1 -- Fixed minor bug that caused script to crash if conky_parse() returns a nil value (20.10.2009)
+ v1.2 -- Added option for the ending angle of the rings (07.10.2009)
+ v1.1 -- Added options for the starting angle of the rings, and added the "max" variable, to allow for variables that output a numerical value rather than a percentage (29.09.2009)
+ v1.0 -- Original release (28.09.2009)
]]
--SETTINGS FOR RING METER #######################################################################
settings_table = {
{
-- Edit this table to customise your rings.
-- You can create more rings simply by adding more elements to settings_table.
-- "name" is the type of stat to display; you can choose from 'cpu', 'memperc', 'fs_used_perc', 'battery_used_perc'.
name='cpu',
-- "arg" is the argument to the stat type, e.g. if in Conky you would write ${cpu cpu0}, 'cpu0' would be the argument. If you would not use an argument in the Conky variable, use ''.
arg='cpu1',
-- "max" is the maximum value of the ring. If the Conky variable outputs a percentage, use 100.
max=100,
-- "bg_colour" is the colour of the base ring.
bg_colour=0xffffff,
-- "bg_alpha" is the alpha value of the base ring.
bg_alpha=0.15,
-- "fg_colour" is the colour of the indicator part of the ring.
fg_colour=0x0A86F2,
-- "fg_alpha" is the alpha value of the indicator part of the ring.
fg_alpha=0.8,
-- "x" and "y" are the x and y coordinates of the centre of the ring, relative to the top left corner of the Conky window.
x=195, y=200,
-- "radius" is the radius of the ring.
radius=30,
-- "thickness" is the thickness of the ring, centred around the radius.
thickness=5,
-- "start_angle" is the starting angle of the ring, in degrees, clockwise from top. Value can be either positive or negative.
start_angle=0,
-- "end_angle" is the ending angle of the ring, in degrees, clockwise from top. Value can be either positive or negative, but must be larger (e.g. more clockwise) than start_angle.
end_angle=360
},
{
name='cpu',
arg='cpu0',
max=100,
bg_colour=0xffffff,
bg_alpha=0.1,
fg_colour=0x41C902,
fg_alpha=0.8,
x=195, y=200,
radius=35,
thickness=5,
start_angle=0,
end_angle=360
},
{
name='cpu',
arg='cpu1',
max=100,
bg_colour=0xffffff,
bg_alpha=0.15,
fg_colour=0xFF8800,
fg_alpha=0.8,
x=195, y=200,
radius=40,
thickness=5,
start_angle=0,
end_angle=360
},
{
name='memperc',
arg='',
max=100,
bg_colour=0xffffff,
bg_alpha=0.1,
fg_colour=0x8159F0,
fg_alpha=0.8,
x=195, y=200,
radius=63,
thickness=12,
start_angle=-45,
end_angle=220
},
{
name='fs_used_perc',
arg='/',
max=150,
bg_colour=0xffffff,
bg_alpha=0.1,
fg_colour=0x00FF00,
fg_alpha=8,
x=195, y=200,
radius=60,
thickness=5,
start_angle=-135,
end_angle=-50
},
{
name='fs_used_perc',
arg='/home',
max=100,
bg_colour=0xffffff,
bg_alpha=0.1,
fg_colour=0x00CC00,
fg_alpha=8,
x=195, y=200,
radius=67,
thickness=5,
start_angle=-135,
end_angle=-50
},
}

require 'cairo'

function rgb_to_r_g_b(colour,alpha)
return ((colour / 0x10000) % 0x100) / 255., ((colour / 0x100) % 0x100) / 255., (colour % 0x100) / 255., alpha
end

function draw_ring(cr,t,pt)
local w,h=conky_window.width,conky_window.height

local xc,yc,ring_r,ring_w,sa,ea=pt['x'],pt['y'],pt['radius'],pt['thickness'],pt['start_angle'],pt['end_angle']
local bgc, bga, fgc, fga=pt['bg_colour'], pt['bg_alpha'], pt['fg_colour'], pt['fg_alpha']

local angle_0=sa*(2*math.pi/360)-math.pi/2
local angle_f=ea*(2*math.pi/360)-math.pi/2
local t_arc=t*(angle_f-angle_0)

-- Draw background ring

cairo_arc(cr,xc,yc,ring_r,angle_0,angle_f)
cairo_set_source_rgba(cr,rgb_to_r_g_b(bgc,bga))
cairo_set_line_width(cr,ring_w)
cairo_stroke(cr)

-- Draw indicator ring

cairo_arc(cr,xc,yc,ring_r,angle_0,angle_0+t_arc)
cairo_set_source_rgba(cr,rgb_to_r_g_b(fgc,fga))
cairo_stroke(cr)
end

function conky_combined()
--BACKGROUND DRAWING PART##################################################################################
if conky_window == nil then return end
if cs == nil then cairo_destroy(cs) end
if cr == nil then cairo_destroy(cr) end
local w = conky_window.width
local h = conky_window.height
local v = vindsl_hack_height
local cs = cairo_xlib_surface_create(conky_window.display, conky_window.drawable, conky_window.visual, conky_window.width, conky_window.height)
local cr = cairo_create(cs)

cairo_move_to(cr,corner_r,0)
cairo_line_to(cr,w-corner_r,0)
cairo_curve_to(cr,w,0,w,0,w,corner_r)
cairo_line_to(cr,w,h+v-corner_r)
cairo_curve_to(cr,w,h+v,w,h+v,w-corner_r,h+v)
cairo_line_to(cr,corner_r,h+v)
cairo_curve_to(cr,0,h+v,0,h+v,0,h+v-corner_r)
cairo_line_to(cr,0,corner_r)
cairo_curve_to(cr,0,0,0,0,corner_r,0)
cairo_close_path(cr)

cairo_set_source_rgba(cr,rgb_to_r_g_b(bg_colour,bg_alpha))
cairo_fill(cr)

cairo_destroy(cr)

--RINGMETER PART OF MAIN FUNCTION ################################################
local function setup_rings(cr,pt)
local str=''
local value=0

str=string.format('${%s %s}',pt['name'],pt['arg'])
str=conky_parse(str)

value=tonumber(str)
if value == nil then value = 0 end
pct=value/pt['max']

draw_ring(cr,pct,pt)
end

if conky_window==nil then return end
local cs=cairo_xlib_surface_create(conky_window.display,conky_window.drawable,conky_window.visual, conky_window.width,conky_window.height)

local cr=cairo_create(cs)

local updates=conky_parse('${updates}')
update_num=tonumber(updates)

if update_num>5 then
for i in pairs(settings_table) do
setup_rings(cr,settings_table[i])
end
end
end

bargraph.lua
Spoiler:
--[[ BARGRAPH WIDGET
v2.0 by wlourf (12.07.2010)
this widget draws a bargraph with differe,ts effects
http://u-scripts.blogspot.com/2010/07/b ... idget.html


Parameters are :
3 parameters are mandatory
name - the name of the conky variable to display, for example for {$cpu cpu0}, just write name="cpu"
arg - the argument of the above variable, for example for {$cpu cpu0}, just write arg="cpu0"
arg can be a numericla value if name=""
max - the maximum value the above variable can reach, for example for {$cpu cpu0}, just write max=100

Optional parameters:
x,y - coordinates of the starting point of the bar, default = middle of the conky window
cap - end of cap line, ossibles values are r,b,s (for round, butt, square), default="b"
http://www.cairographics.org/samples/set_line_cap/
angle - angle of rotation of the bar in degress, default = 0 (i.e. a vertical bar)
set to 90 for an horizontal bar
skew_x - skew bar around x axis, défaut = 0
skew_y - skew bar around y axis, défaut = 0
blocks - number of blocks to display for a bar (values >0) , default= 10
height - height of a block, default=10 pixels
width - width of a block, default=20 pixels
space - space between 2 blocks, default=2 pixels
angle_bar - this angle is used to draw a bar on a circular way (ok, this is no more a bar !) default=0
radius - for cicular bars, internal radius, default=0
with radius, parameter width has no more effect.

Colours below are defined into braces {colour in hexadecimal, alpha}
fg_colour - colour of a block ON, default= {0x00FF00,1}
bg_colour - colour of a block OFF, défaut = {0x00FF00,0.5}
alarm - threshold, values after this threshold will use alarm_colour colour , default=max
alarm_colour - colour of a block greater than alarm, default=fg_colour
smooth - (true or false), create a gradient from fg_colour to bg_colour, default=false
mid_colour - colours to add to gradient, with this syntax {position into the gradient (0 to1), colour hexa, alpha}
for example, this table {{0.25,0xff0000,1},{0.5,0x00ff00,1},{0.75,0x0000ff,1}} will add
3 colurs to gradient created by fg_colour and alarm_colour, default=no mid_colour
led_effect - add LED effects to each block, default=no led_effect
if smooth=true, led_effect is not used
possibles values : "r","a","e" for radial, parallelel, perdendicular to the bar (just try!)
led_effect has to be used with theses colours :
fg_led - middle colour of a block ON, default = fg_colour
bg_led - middle colour of a block OFF, default = bg_colour
alarm_led - middle colour of a block > ALARM, default = alarm_colour

reflection parameters, not avaimable for circular bars
reflection_alpha - add a reflection effect (values from 0 to 1) default = 0 = no reflection
other values = starting opacity
reflection_scale - scale of the reflection (default = 1 = height of text)
reflection_length - length of reflection, define where the opacity will be set to zero
calues from 0 to 1, default =1
reflection - position of reflection, relative to a vertical bar, default="b"
possibles values are : "b","t","l","r" for bottom, top, left, right


v1.0 (10 Feb. 2010) original release
v1.1 (13 Feb. 2010) numeric values can be passed instead conky stats with parameters name="", arg = numeric_value
v1.2 (28 Feb. 2010) just renamed the widget to bargraph
v1.3 (03 March 2010) added parameters radius & angle_bar to draw the bar in a circular way
v2.0 (12 Jul. 2010) rewrite script + add reflection effects and parameters are now set into tables
]]

require 'cairo'

----------------START OF PARAMETERS ----------
function conky_main_bars()
bars_settings={
{
name="wireless_link_qual_perc",
arg="eth0",
max=100,
alarm=50,
angle_bar=3,
bg_colour={0xFFFFFF,0.25},
fg_colour={0xFF0000,0.9},
alarm_colour={0x00FF00,0.9},
x=95,y=522,
blocks=45,
space=1,
height=2,width=4,
angle=90,
smooth=true,
mid_colour={{0.5,0xFFFF00,0.9}}
},
}

-----------END OF PARAMETERS--------------



if conky_window == nil then return end

local cs = cairo_xlib_surface_create(conky_window.display, conky_window.drawable, conky_window.visual, conky_window.width, conky_window.height)

cr = cairo_create(cs)
--prevent segmentation error when reading cpu state
if tonumber(conky_parse('${updates}'))>3 then
for i in pairs(bars_settings) do

draw_multi_bar_graph(bars_settings[i])

end
end
cairo_destroy(cr)
cairo_surface_destroy(cs)

end



function draw_multi_bar_graph(t)
cairo_save(cr)
--check values
if t.name==nil and t.arg==nil then
print ("No input values ... use parameters 'name' with 'arg' or only parameter 'arg' ")
return
end
if t.max==nil then
print ("No maximum value defined, use 'max'")
return
end
if t.name==nil then t.name="" end
if t.arg==nil then t.arg="" end

--set default values
if t.x == nil then t.x = conky_window.width/2 end
if t.y == nil then t.y = conky_window.height/2 end
if t.blocks == nil then t.blocks=10 end
if t.height == nil then t.height=10 end
if t.angle == nil then t.angle=0 end
t.angle = t.angle*math.pi/180
--line cap style
if t.cap==nil then t.cap = "b" end
local cap="b"
for i,v in ipairs({"s","r","b"}) do
if v==t.cap then cap=v end
end
delta=0
if t.cap=="r" or t.cap=="s" then delta = t.height end
if cap=="s" then cap = CAIRO_LINE_CAP_SQUARE
elseif cap=="r" then
cap = CAIRO_LINE_CAP_ROUND
elseif cap=="b" then
cap = CAIRO_LINE_CAP_BUTT
end
--end line cap style
--if t.led_effect == nil then t.led_effect="r" end
if t.width == nil then t.width=20 end
if t.space == nil then t.space=2 end
if t.radius == nil then t.radius=0 end
if t.angle_bar == nil then t.angle_bar=0 end
t.angle_bar = t.angle_bar*math.pi/360 --halt angle

--colours
if t.bg_colour == nil then t.bg_colour = {0x00FF00,0.5} end
if #t.bg_colour~=2 then t.bg_colour = {0x00FF00,0.5} end
if t.fg_colour == nil then t.fg_colour = {0x00FF00,1} end
if #t.fg_colour~=2 then t.fg_colour = {0x00FF00,1} end
if t.alarm_colour == nil then t.alarm_colour = t.fg_colour end
if #t.alarm_colour~=2 then t.alarm_colour = t.fg_colour end

if t.mid_colour ~= nil then
for i=1, #t.mid_colour do
if #t.mid_colour[i]~=3 then
print ("error in mid_color table")
t.mid_colour[i]={1,0xFFFFFF,1}
end
end
end

if t.bg_led ~= nil and #t.bg_led~=2 then t.bg_led = t.bg_colour end
if t.fg_led ~= nil and #t.fg_led~=2 then t.fg_led = t.fg_colour end
if t.alarm_led~= nil and #t.alarm_led~=2 then t.alarm_led = t.fg_led end

if t.led_effect~=nil then
if t.bg_led == nil then t.bg_led = t.bg_colour end
if t.fg_led == nil then t.fg_led = t.fg_colour end
if t.alarm_led == nil then t.alarm_led = t.fg_led end
end


if t.alarm==nil then t.alarm = t.max end --0.8*t.max end
if t.smooth == nil then t.smooth = false end

if t.skew_x == nil then
t.skew_x=0
else
t.skew_x = math.pi*t.skew_x/180
end
if t.skew_y == nil then
t.skew_y=0
else
t.skew_y = math.pi*t.skew_y/180
end

if t.reflection_alpha==nil then t.reflection_alpha=0 end
if t.reflection_length==nil then t.reflection_length=1 end
if t.reflection_scale==nil then t.reflection_scale=1 end

--end of default values


local function rgb_to_r_g_b(col_a)
return ((col_a[1] / 0x10000) % 0x100) / 255., ((col_a[1] / 0x100) % 0x100) / 255., (col_a[1] % 0x100) / 255., col_a[2]
end


--functions used to create patterns

local function create_smooth_linear_gradient(x0,y0,x1,y1)
local pat = cairo_pattern_create_linear (x0,y0,x1,y1)
cairo_pattern_add_color_stop_rgba (pat, 0, rgb_to_r_g_b(t.fg_colour))
cairo_pattern_add_color_stop_rgba (pat, 1, rgb_to_r_g_b(t.alarm_colour))
if t.mid_colour ~=nil then
for i=1, #t.mid_colour do
cairo_pattern_add_color_stop_rgba (pat, t.mid_colour[i][1], rgb_to_r_g_b({t.mid_colour[i][2],t.mid_colour[i][3]}))
end
end
return pat
end

local function create_smooth_radial_gradient(x0,y0,r0,x1,y1,r1)
local pat = cairo_pattern_create_radial (x0,y0,r0,x1,y1,r1)
cairo_pattern_add_color_stop_rgba (pat, 0, rgb_to_r_g_b(t.fg_colour))
cairo_pattern_add_color_stop_rgba (pat, 1, rgb_to_r_g_b(t.alarm_colour))
if t.mid_colour ~=nil then
for i=1, #t.mid_colour do
cairo_pattern_add_color_stop_rgba (pat, t.mid_colour[i][1], rgb_to_r_g_b({t.mid_colour[i][2],t.mid_colour[i][3]}))
end
end
return pat
end

local function create_led_linear_gradient(x0,y0,x1,y1,col_alp,col_led)
local pat = cairo_pattern_create_linear (x0,y0,x1,y1) ---delta, 0,delta+ t.width,0)
cairo_pattern_add_color_stop_rgba (pat, 0.0, rgb_to_r_g_b(col_alp))
cairo_pattern_add_color_stop_rgba (pat, 0.5, rgb_to_r_g_b(col_led))
cairo_pattern_add_color_stop_rgba (pat, 1.0, rgb_to_r_g_b(col_alp))
return pat
end

local function create_led_radial_gradient(x0,y0,r0,x1,y1,r1,col_alp,col_led,mode)
local pat = cairo_pattern_create_radial (x0,y0,r0,x1,y1,r1)
if mode==3 then
cairo_pattern_add_color_stop_rgba (pat, 0, rgb_to_r_g_b(col_alp))
cairo_pattern_add_color_stop_rgba (pat, 0.5, rgb_to_r_g_b(col_led))
cairo_pattern_add_color_stop_rgba (pat, 1, rgb_to_r_g_b(col_alp))
else
cairo_pattern_add_color_stop_rgba (pat, 0, rgb_to_r_g_b(col_led))
cairo_pattern_add_color_stop_rgba (pat, 1, rgb_to_r_g_b(col_alp))
end
return pat
end






local function draw_single_bar()
--this fucntion is used for bars with a single block (blocks=1) but
--the drawing is cut in 3 blocks : value/alarm/background
--not zvzimzblr for circular bar
local function create_pattern(col_alp,col_led,bg)
local pat

if not t.smooth then
if t.led_effect=="e" then
pat = create_led_linear_gradient (-delta, 0,delta+ t.width,0,col_alp,col_led)
elseif t.led_effect=="a" then
pat = create_led_linear_gradient (t.width/2, 0,t.width/2,-t.height,col_alp,col_led)
elseif t.led_effect=="r" then
pat = create_led_radial_gradient (t.width/2, -t.height/2, 0, t.width/2,-t.height/2,t.height/1.5,col_alp,col_led,2)
else
pat = cairo_pattern_create_rgba (rgb_to_r_g_b(col_alp))
end
else
if bg then
pat = cairo_pattern_create_rgba (rgb_to_r_g_b(t.bg_colour))
else
pat = create_smooth_linear_gradient(t.width/2, 0, t.width/2,-t.height)
end
end
return pat
end

local y1=-t.height*pct/100
local y2=nil
if pct>(100*t.alarm/t.max) then
y1 = -t.height*t.alarm/100
y2 = -t.height*pct/100
if t.smooth then y1=y2 end
end

if t.angle_bar==0 then

--block for fg value
pat = create_pattern(t.fg_colour,t.fg_led,false)
cairo_set_source(cr,pat)
cairo_rectangle(cr,0,0,t.width,y1)
cairo_fill(cr)

-- block for alarm value
if not t.smooth and y2 ~=nil then
pat = create_pattern(t.alarm_colour,t.alarm_led,false)
cairo_set_source(cr,pat)
cairo_rectangle(cr,0,y1,t.width,y2-y1)
cairo_fill(cr)
y3=y2
else
y2,y3=y1,y1
end
-- block for bg value
cairo_rectangle(cr,0,y2,t.width,-t.height-y3)
pat = create_pattern(t.bg_colour,t.bg_led,true)
cairo_set_source(cr,pat)
cairo_pattern_destroy(pat)
cairo_fill(cr)
end
end --end single bar






local function draw_multi_bar()
--function used for bars with 2 or more blocks
for pt = 1,t.blocks do
--set block y
local y1 = -(pt-1)*(t.height+t.space)
local light_on=false

--set colors
local col_alp = t.bg_colour
local col_led = t.bg_led
if pct>=(100/t.blocks) or pct>0 then --ligth on or not the block
if pct>=(pcb*(pt-1)) then
light_on = true
col_alp = t.fg_colour
col_led = t.fg_led
if pct>=(100*t.alarm/t.max) and (pcb*pt)>(100*t.alarm/t.max) then
col_alp = t.alarm_colour
col_led = t.alarm_led
end
end
end

--set colors
--have to try to create gradients outside the loop ?
local pat

if not t.smooth then
if t.angle_bar==0 then
if t.led_effect=="e" then
pat = create_led_linear_gradient (-delta, 0,delta+ t.width,0,col_alp,col_led)
elseif t.led_effect=="a" then
pat = create_led_linear_gradient (t.width/2, -t.height/2+y1,t.width/2,0+t.height/2+y1,col_alp,col_led)
elseif t.led_effect=="r" then
pat = create_led_radial_gradient (t.width/2, y1, 0, t.width/2,y1,t.width/1.5,col_alp,col_led,2)
else
pat = cairo_pattern_create_rgba (rgb_to_r_g_b(col_alp))
end
else
if t.led_effect=="a" then
pat = create_led_radial_gradient (0, 0, t.radius+(t.height+t.space)*(pt-1),
0, 0, t.radius+(t.height+t.space)*(pt),
col_alp,col_led,3)
else
pat = cairo_pattern_create_rgba (rgb_to_r_g_b(col_alp))
end

end
else

if light_on then
if t.angle_bar==0 then
pat = create_smooth_linear_gradient(t.width/2, t.height/2, t.width/2,-(t.blocks-0.5)*(t.height+t.space))
else
pat = create_smooth_radial_gradient(0, 0, (t.height+t.space), 0,0,(t.blocks+1)*(t.height+t.space),2)
end
else
pat = cairo_pattern_create_rgba (rgb_to_r_g_b(t.bg_colour))
end
end
cairo_set_source (cr, pat)
cairo_pattern_destroy(pat)

--draw a block
if t.angle_bar==0 then
cairo_move_to(cr,0,y1)
cairo_line_to(cr,t.width,y1)
else
cairo_arc( cr,0,0,
t.radius+(t.height+t.space)*(pt)-t.height/2,
-t.angle_bar -math.pi/2 ,
t.angle_bar -math.pi/2)
end
cairo_stroke(cr)
end
end




local function setup_bar_graph()
--function used to retrieve the value to display and to set the cairo structure
if t.blocks ~=1 then t.y=t.y-t.height/2 end

local value = 0
if t.name ~="" then
value = tonumber(conky_parse(string.format('${%s %s}', t.name, t.arg)))
else
value = tonumber(t.arg)
end

if value==nil then value =0 end

pct = 100*value/t.max
pcb = 100/t.blocks

cairo_set_line_width (cr, t.height)
cairo_set_line_cap (cr, cap)
cairo_translate(cr,t.x,t.y)
cairo_rotate(cr,t.angle)

local matrix0 = cairo_matrix_t:create()
cairo_matrix_init (matrix0, 1,t.skew_y,t.skew_x,1,0,0)
cairo_transform(cr,matrix0)



--call the drawing function for blocks
if t.blocks==1 and t.angle_bar==0 then
draw_single_bar()
if t.reflection=="t" or t.reflection=="b" then cairo_translate(cr,0,-t.height) end
else
draw_multi_bar()
end

--dot for reminder
--[[
if t.blocks ~=1 then
cairo_set_source_rgba(cr,1,0,0,1)
cairo_arc(cr,0,t.height/2,3,0,2*math.pi)
cairo_fill(cr)
else
cairo_set_source_rgba(cr,1,0,0,1)
cairo_arc(cr,0,0,3,0,2*math.pi)
cairo_fill(cr)
end
]]
--call the drawing function for reflection and prepare the mask used
if t.reflection_alpha>0 and t.angle_bar==0 then
local pat2
local matrix1 = cairo_matrix_t:create()
if t.angle_bar==0 then
pts={-delta/2,(t.height+t.space)/2,t.width+delta,-(t.height+t.space)*(t.blocks)}
if t.reflection=="t" then
cairo_matrix_init (matrix1,1,0,0,-t.reflection_scale,0,-(t.height+t.space)*(t.blocks-0.5)*2*(t.reflection_scale+1)/2)
pat2 = cairo_pattern_create_linear (t.width/2,-(t.height+t.space)*(t.blocks),t.width/2,(t.height+t.space)/2)
elseif t.reflection=="r" then
cairo_matrix_init (matrix1,-t.reflection_scale,0,0,1,delta+2*t.width,0)
pat2 = cairo_pattern_create_linear (delta/2+t.width,0,-delta/2,0)
elseif t.reflection=="l" then
cairo_matrix_init (matrix1,-t.reflection_scale,0,0,1,-delta,0)
pat2 = cairo_pattern_create_linear (-delta/2,0,delta/2+t.width,-0)
else --bottom
cairo_matrix_init (matrix1,1,0,0,-1*t.reflection_scale,0,(t.height+t.space)*(t.reflection_scale+1)/2)
pat2 = cairo_pattern_create_linear (t.width/2,(t.height+t.space)/2,t.width/2,-(t.height+t.space)*(t.blocks))
end
end
cairo_transform(cr,matrix1)

if t.blocks==1 and t.angle_bar==0 then
draw_single_bar()
cairo_translate(cr,0,-t.height/2)
else
draw_multi_bar()
end


cairo_set_line_width(cr,0.01)
cairo_pattern_add_color_stop_rgba (pat2, 0,0,0,0,1-t.reflection_alpha)
cairo_pattern_add_color_stop_rgba (pat2, t.reflection_length,0,0,0,1)
if t.angle_bar==0 then
cairo_rectangle(cr,pts[1],pts[2],pts[3],pts[4])
end
cairo_clip_preserve(cr)
cairo_set_operator(cr,CAIRO_OPERATOR_CLEAR)
cairo_stroke(cr)
cairo_mask(cr,pat2)
cairo_pattern_destroy(pat2)
cairo_set_operator(cr,CAIRO_OPERATOR_OVER)

end --reflection


end --setup_bar_graph()


--start here !
setup_bar_graph()
cairo_restore(cr)
end

start_conky.sh
Spoiler:
#!/bin/bash
sleep 30
conky -c ~/.conkycolors/conkyrc2&
exit 0


OBS: se usarem rede wirelles terão que alterar eth0 para wlan0
Editado pela última vez por Roger Braga em Sáb, 23 de Julho 2011, 2:31, em um total de 3 vezes.

AGARB REGOR


Imagem
:ubuntued: "Somente seres humanos excepcionais e irrepreensíveis suscitam ideias generosas e ações elevadas. O conhecimento é limitado. A imaginação envolve ao mundo."
:ubuntued:
Avatar do usuário
Roger Braga
Mr. Deskmod
 
Mensagens: 755
Registrado em: 04 Julho, 2011
Localização: São Paulo, BRASIL

Re: Configurações Conky

Mensagempor Roger Braga » Qui, 21 de Julho 2011, 15:17

Outro conkycolors
Imagen

conkyrc
Spoiler:
##################################
## VinDSL | rev. 10-12-27 03:45 ##
##################################

####
## Use XFT? Required to Force UTF8 (see below).
#
use_xft yes
xftfont LiberationSans:size=8.85
xftalpha 0.7
text_buffer_size 2048

####
## Force UTF8? Requires XFT (see above).
## Displays degree symbol, instead of °, etc.
#
override_utf8_locale yes

####
## Update interval in seconds.
#
update_interval 1.5

####
## This is the number of times Conky will update before quitting.
## Set to zero to run forever.
#
total_run_times 0

####
## Create own window instead of using desktop (required in nautilus)?
#
own_window yes
own_window_type override
own_window_transparent yes

####
## Use double buffering? Reduces flicker.
#
double_buffer yes

####
## Draw shades?
#
draw_shades no

####
## Draw outlines?
#
draw_outline no

####
## Draw borders around text?
#
draw_borders no

####
## Draw borders around graphs?
#
draw_graph_borders no

####
## Print text to stdout?
## Print text in console?
#
out_to_ncurses no
out_to_console no

####
## Text alignment.
#
alignment top_right

####
## Minimum size of text area.
#
minimum_size 235 0

####
## Gap between text and screen borders.
#
gap_x 10
gap_y 10

####
## Shorten MiB/GiB to M/G in stats.
#
short_units yes

####
## Pad % symbol spacing after numbers.
#
pad_percents 0

####
## Pad spacing between text and borders.
#
border_inner_margin 4

####
## Limit the length of names in "Top Processes".
#
top_name_width 10

####
## Subtract file system -/+buffers/cache from used memory?
## Set to yes, to produce meaningful physical memory stats.
#
no_buffers yes

####
## Set to yes, if you want all text to be in UPPERCASE.
#
uppercase no

####
## Number of cpu samples to average.
## Set to 1 to disable averaging.
#
cpu_avg_samples 2

####
## Number of net samples to average.
## Set to 1 to disable averaging.
#
net_avg_samples 2

####
## Add spaces to keep things from moving around?
## Only affects certain objects.
#
use_spacer right

####
## My colors (suit yourself).
#
color0 White
color1 Ivory
color2 Ivory2
color3 Ivory3
color4 Tan1
color5 Tan2
color6 Gray
color7 AntiqueWhite4
color8 DarkSlateGray
color9 Black

####
## Load Lua for shading (optional).
## Set the path to your script here.
#
lua_load ~/.conky/draw_bg.lua
lua_draw_hook_pre draw_bg

####
## Installed fonts (required).
#
# ConkyWeather (Stanko Metodiev)
# ConkyWindNESW (Stanko Metodiev)
# Cut Outs for 3D FX (Fonts & Things)
# Liberation Mono (Ascender Corp)
# Liberation Sans (Ascender Corp)
# Moon Phases (Curtis Clark)
# OpenLogos (Icoma)
# PizzaDude Bullets (Jakob Fischer)
# Radio Space (Iconian Fonts)
# StyleBats (Vinterstille)
# Ubuntu (Canonical Ltd)
# Ubuntu Title Bold (Paulo Silva)
# Weather (Jonathan Macagba)
# WenQuanYi Micro Hei (Google Corp)

TEXT
##################
## LOGO ##
##################
${voffset -33}${font OpenLogos:size=103}${color2}v${font}${voffset -76}${goto 178}${font UbuntuTitleBold:size=20}${color4}10.10${font}
##################
## SYSTEM ##
##################
${voffset 20}${font WenQuanYiMicroHei:bold:size=8.75}${color4}SYSTEM${offset 8}${color8}${voffset -2}${hr 2}${font}
${voffset 4}${font OpenLogos:size=10}${color2}u${voffset -4}${font}${color6}${offset 5}${sysname}${offset 5}${kernel}${alignr}${machine}
${voffset 2}${font StyleBats:size=10}${color2}A${voffset -1}${font}${color6}${offset 5}Intel${offset 3}P4${offset 3}Extreme${offset 3}Edition${alignr}${freq_g cpu0}${offset 1}GHz
${voffset 2}${font StyleBats:size=10}${color2}q${voffset -1}${font}${color6}${offset 5}Uptime${alignr}${uptime}
${voffset 2}${font StyleBats:size=10}${color2}o${voffset -1}${font}${color6}${offset 5}File${offset 3}System${alignr}${fs_type}
${voffset 2}${font StyleBats:size=10}${color2}Z${voffset -1}${font}${color6}${offset 5}Gmail${alignr}${execpi 1800 python /home/roger/.conky/gmail.py}
##################
## PROCESSORS ##
##################
${voffset 6}${font WenQuanYiMicroHei:bold:size=8.75}${color4}PROCESSORS${offset 8}${color8}${voffset -2}${hr 2}${font}
${voffset 4}${font StyleBats:size=10}${color2}k${voffset -2}${font}${color6}${offset 2}CPU1${offset 5}${cpu cpu1}%${color7}${alignr 2}${cpubar 4,153 cpu1}
${voffset 2}${font StyleBats:size=10}${color2}k${voffset -2}${font}${color6}${offset 2}CPU2${offset 5}${cpu cpu2}%${color7}${alignr 2}${cpubar 4,153 cpu2}
##################
## MEMORY ##
##################
${voffset 6}${font WenQuanYiMicroHei:bold:size=8.75}${color4}MEMORY${offset 8}${color8}${voffset -2}${hr 2}${font}
${voffset 4}${font StyleBats:size=10}${color2}l${voffset -2}${font}${color6}${offset 3}RAM${goto 97}${mem}${goto 133}/${offset 5}${memmax}${alignr}${memperc}%
${color7}${alignr 2}${membar 4,230}
##################
## HDD ##
##################
${voffset 2}${font WenQuanYiMicroHei:bold:size=8.75}${color4}HDD${offset 8}${color8}${voffset -2}${hr 2}${font}
${voffset 4}${font StyleBats:size=10}${color2}x${voffset -2}${font}${color6}${offset 4}ROOT${goto 95}${fs_used /}${goto 133}/${offset 5}${fs_size /}${alignr}${fs_free_perc /}%
${color7}${alignr 2}${fs_bar 4,230 /}
${voffset 1}${font StyleBats:size=10}${color2}x${voffset -2}${font}${color6}${offset 4}HOME${goto 95}${fs_used /home}${goto 133}/${offset 5}${fs_size /home}${alignr}${fs_free_perc /home}%
${color7}${alignr 2}${fs_bar 4,230 /home}
${voffset 1}${font StyleBats:size=10}${color2}4${voffset -2}${font}${color6}${offset 4}SWAP${goto 95}${swap}${goto 133}/${offset 5}${swapmax}${alignr}${swapperc}%
${color7}${alignr 2}${swapbar 4,230}
##################
# TOP PROCESSES ##
##################
${voffset 3}${font WenQuanYiMicroHei:bold:size=8.75}${color4}TOP PROCESSES${offset 8}${color8}${voffset -2}${hr 2}${font}
${voffset 4}${font StyleBats:size=10}${color1}h${voffset -3}${font}${color6}${offset 5}${top_mem name 1}${goto 115}${top_mem mem_res 1}${alignr}${top_mem mem 1}%
${voffset 2}${font StyleBats:size=10}${color1}h${voffset -3}${font}${color6}${offset 5}${top_mem name 2}${goto 115}${top_mem mem_res 2}${alignr}${top_mem mem 2}%
${voffset 2}${font StyleBats:size=10}${color1}h${voffset -3}${font}${color6}${offset 5}${top_mem name 3}${goto 115}${top_mem mem_res 3}${alignr}${top_mem mem 3}%
${voffset 2}${font StyleBats:size=10}${color1}h${voffset -3}${font}${color6}${offset 5}${top_mem name 4}${goto 115}${top_mem mem_res 4}${alignr}${top_mem mem 4}%
${voffset 2}${font StyleBats:size=10}${color1}h${voffset -3}${font}${color6}${offset 5}${top_mem name 5}${goto 115}${top_mem mem_res 5}${alignr}${top_mem mem 5}%
##################
## NETWORK ##
##################
${voffset 6}${font WenQuanYiMicroHei:bold:size=8.75}${color4}NETWORK${offset 8}${color8}${voffset -2}${hr 2}${font}
${voffset 4}${font PizzaDudeBullets:size=10}${color2}a${font}${color6}${offset 5}Private${offset 3}IP${alignr}${addr eth0}
${font PizzaDudeBullets:size=10}${color2}a${font}${color6}${offset 5}Public${offset 7}IP${alignr}${execi 1800 wget -q -O - checkip.dyndns.org | sed -e 's/[^[:digit:]\|.]//g'}
${voffset 4}${font PizzaDudeBullets:size=10}${color2}T${font}${color6}${offset 5}Down${alignr}${downspeed eth0}
${font PizzaDudeBullets:size=10}${color2}N${font}${color6}${offset 5}Up${alignr}${upspeed eth0}
${voffset 4}${font PizzaDudeBullets:size=10}${color2}T${font}${color6}${offset 5}Downloaded${alignr}${totaldown eth0}
${font PizzaDudeBullets:size=10}${color2}N${font}${color6}${offset 5}Uploaded${alignr}${totalup eth0}
##################
## WEATHER ##
##################
${voffset 6}${font WenQuanYiMicroHei:bold:size=8.75}${color4}WEATHER${offset 8}${color8}${voffset -2}${hr 2}${font}
${voffset 0}${goto 59}${font Weather:size=38}${color1}y${font}${voffset -33}${offset 14}${font RadioSpace:size=32}${color3}${execpi 1800 conkyForecast --location=BRXX0232}${font}
${voffset 0}${font Ubuntu:size=24}${color4}${alignc}${execi 1800 conkyForecast --location=BRXX0232 --datatype=CT}${font}
${voffset 15}${goto 20}${font ConkyWindNESW:style=Bold:size=38}${color2}${execi 1800 conkyForecast --location=BRXX0232 --datatype=BS}${font}${voffset -45}${goto 95}${font ConkyWeather:style=Bold:size=45}${color2}${execi 1800 conkyForecast --location=BRXX0232 --datatype=WF}${font}${voffset -30}${goto 185}${font MoonPhases:size=30}${color2}${execi 1800 conkyForecast --location=BRXX0232 --datatype=MF}${font}
${voffset 2}${goto 28}${font}${color2}${execpi 1800 conkyForecast --location=BRXX0232 --datatype=WS | sed -e 's/calm'/'\$\{offset 2}Calm/g' -e 's/mph'/'\$\{offset 2}mph/g'}${goto 89}Feels like ${execi 1800 conkyForecast --location=BRXX0232 --datatype=LT --centeredwidth=4 -iu}${execpi 1800 conkyForecast --location=BRXX0232 --datatype=MP | sed -e 's/First.*'/'\$\{goto 185}First Qtr/g' -e 's/Last.*'/'\$\{goto 185}Last Qtr/g' -e 's/New.*'/'\$\{goto 190}New/g' -e 's/Full.*'/'\$\{goto 194}Full/g' -e 's/Waning.*'/'\$\{goto 185}Waning/g' -e 's/Waxing.*'/'\$\{goto 185}Waxing/g'}${font}
${voffset 10}${goto 35}${font}${color2}${execi 1800 conkyForecast --location=BRXX0232 --datatype=DW --startday=1 --shortweekday}${goto 89}${execi 1800 conkyForecast --location=BRXX0232 --datatype=DW --startday=2 --shortweekday}${goto 142}${execi 1800 conkyForecast --location=BRXX0232 --datatype=DW --startday=3 --shortweekday}${goto 196}${execi 1800 conkyForecast --location=BRXX0232 --datatype=DW --startday=4 --shortweekday}${font}
${voffset 0}${goto 25}${font ConkyWeather:size=32}${color2}${execi 1800 conkyForecast --location=BRXX0232 --datatype=WF --startday=1 --endday=4 --spaces=1}${font}
${voffset 0}${goto 25}${font}${color2}${execi 1800 conkyForecast --location=BRXX0232 --datatype=HT --startday=1 --hideunits --centeredwidth=4 -iu}/${offset 4}${execi 1800 conkyForecast --location=BRXX0232 --datatype=LT --startday=1 --hideunits --centeredwidth=4 -iu}${goto 79}${execi 1800 conkyForecast --location=BRXX0232 --datatype=HT --startday=2 --hideunits --centeredwidth=4 -iu}/${offset 4}${execi 1800 conkyForecast --location=BRXX0232 --datatype=LT --startday=2 --hideunits --centeredwidth=4 -iu}${goto 133}${execi 1800 conkyForecast --location=BRXX0232 --datatype=HT --startday=3 --hideunits --centeredwidth=4 -iu}/${offset 4}${execi 1800 conkyForecast --location=BRXX0232 --datatype=LT --startday=3 --hideunits --centeredwidth=4 -iu}${goto 187}${execi 1800 conkyForecast --location=BRXX0232 --datatype=HT --startday=4 --hideunits --centeredwidth=4 -iu}/${offset 4}${execi 1800 conkyForecast --location=BRXX0232 --datatype=LT --startday=4 --hideunits --centeredwidth=4 -iu}${font}
##################
## TIME ##
##################
${voffset 6}${font WenQuanYiMicroHei:bold:size=8.75}${color4}TIME${offset 8}${color8}${voffset -2}${hr 2}${font}
${if_match ${time %l}<=9}${voffset -4}${font RadioSpace:size=32}${color3}${alignc 10}${time %k:%M}${font}${else}${if_match ${time %l}>=10}${voffset -4}${font RadioSpace:size=32}${color3}${alignc 2}${time %k:%M}${font}${endif}${endif}
${voffset 0}${font LiberationSans:size=8}${color4}${alignc 5}Sunrise${offset 1}${execi 1800 conkyForecast --location=BRXX0232 --datatype=SR --startday=1}${color3}${offset 2}|${offset 2}${color4}Sunset${offset 1}${execi 1800 conkyForecast --location=BRXX0232 --datatype=SS --startday=1}${font}
##################
## CALENDAR ##
##################
${voffset 6}${font WenQuanYiMicroHei:bold:size=8.75}${color4}DATE${offset 8}${color8}${voffset -2}${hr 2}${font}
${voffset 18}${font LiberationMono:size=8}${color3}${alignc 59}${time %A}${font}
${voffset -3}${font LiberationMono:size=22}${color4}${alignc 58}${time %d}${font}
${voffset -1}${font LiberationMono:size=8}${color3}${alignc 58}${time %B}${font}
${voffset -4}${font LiberationMono:size=8}${color3}${alignc 58}${time %Y}${font}
${voffset -76}${font CutOutsFor3DFX:size=62}${color8}${alignc 94}2${font}
${voffset -69}${font LiberationMono:size=8}${color3}${execpi 1800 VinDSL_Cal3= cal | sed '1d' | sed s/^/"\$\{offset 100"\}/ | sed '/^ *$/d' | sed 's/\<'"$(date +%-d)"'\>/${color4}&${color3}/'}${font}


draw_bg.lua
Spoiler:
--[[
Background by londonali1010 (2009)
VinDSL Background Hack (2010)

This script draws a background to the Conky window. It covers the whole of the Conky window, but you can specify rounded corners, if you wish.

To call this script in Conky, use (assuming you have saved this script to ~/scripts/):
lua_load ~/scripts/draw_bg.lua
lua_draw_hook_pre draw_bg

Changelog:
+ v2.2 -- VinDSL Hack (12.24.2010)
+ v2.1 -- VinDSL Hack (12.21.2010)
+ v1.0 -- Original release (07.10.2009)
--]]

-- Change these settings to affect your background:

-- "corner_r" is the radius, in pixels, of the rounded corners. If you don't want rounded corners, use 0.

corner_r = 40

-- Set the colour and transparency (alpha) of your background.

bg_colour = 0x4d4d4d
bg_alpha = 0.40

-- Tweaks the height of your background, in pixels. If you don't need to adjust the height, use 0.

vindsl_hack = -222

require 'cairo'
cs, cr = nil
function rgb_to_r_g_b(colour,alpha)
return ((colour / 0x10000) % 0x100) / 255., ((colour / 0x100) % 0x100) / 255., (colour % 0x100) / 255., alpha
end

function conky_draw_bg()
if conky_window==nil then return end
if cr==nil then cairo_destroy(cr) end
local w=conky_window.width
local h=conky_window.height
local v=vindsl_hack
local cs=cairo_xlib_surface_create(conky_window.display, conky_window.drawable, conky_window.visual, conky_window.width, conky_window.height)
local cr=cairo_create(cs)

cairo_move_to(cr,corner_r,0)
cairo_line_to(cr,w-corner_r,0)
cairo_curve_to(cr,w,0,w,0,w,corner_r)
cairo_line_to(cr,w,h+v-corner_r)
cairo_curve_to(cr,w,h+v,w,h+v,w-corner_r,h+v)
cairo_line_to(cr,corner_r,h+v)
cairo_curve_to(cr,0,h+v,0,h+v,0,h+v-corner_r)
cairo_line_to(cr,0,corner_r)
cairo_curve_to(cr,0,0,0,0,corner_r,0)
cairo_close_path(cr)

cairo_set_source_rgba(cr,rgb_to_r_g_b(bg_colour,bg_alpha))
cairo_fill(cr)
end

start_conky.sh
Spoiler:
#!/bin/bash
sleep 30
conky -c ~/.conkycolors/conkyrc &
exit 0



OBS:nao esquecer que cada conky tem sua fonte especefica verificar se vc tem a fonte instalada no seu Sistema. :ubuntued:
Editado pela última vez por Roger Braga em Sáb, 23 de Julho 2011, 2:32, em um total de 4 vezes.

AGARB REGOR


Imagem
:ubuntued: "Somente seres humanos excepcionais e irrepreensíveis suscitam ideias generosas e ações elevadas. O conhecimento é limitado. A imaginação envolve ao mundo."
:ubuntued:
Avatar do usuário
Roger Braga
Mr. Deskmod
 
Mensagens: 755
Registrado em: 04 Julho, 2011
Localização: São Paulo, BRASIL

Re: Configurações Conky

Mensagempor Roger Braga » Qui, 21 de Julho 2011, 15:22

Hoje so vou de conky colors
imagen

conkyrc
Spoiler:
######################
# - Conky settings - #
######################
update_interval 1
total_run_times 0
net_avg_samples 1
cpu_avg_samples 1

imlib_cache_size 0
double_buffer yes
no_buffers yes

format_human_readable

#####################
# - Text settings - #
#####################
use_xft yes
xftfont Droid Sans:size=8
override_utf8_locale yes
text_buffer_size 2048

#############################
# - Window specifications - #
#############################
own_window_class Conky
own_window yes
own_window_type normal
own_window_transparent yes
own_window_hints undecorated,below,sticky,skip_taskbar,skip_pager

alignment top_right
gap_x 5
gap_y 5
minimum_size 182 600
maximum_width 182

default_bar_size 60 8

#########################
# - Graphics settings - #
#########################
draw_shades no

default_color cccccc

color0 white
color1 8B0000
color2 white

TEXT
${font Droid Sans:style=Bold:size=8}SISTEMA $stippled_hr${font}
##############
# - SYSTEM - #
##############
${color0}${voffset 6}${font OpenLogos:size=19}u${font}${color}${goto 32}${voffset -14}Kernel: ${alignr}${color2}${kernel}${color}
${goto 32}Atividade: ${alignr}${color2}${uptime}${color}
# |--UPDATES
${goto 32}Atualizações: ${alignr}${font Droid Sans:style=Bold:size=8}${color1}${execi 360 aptitude search "~U" | wc -l | tail}${color}${font} ${color2}Pacotes${color}
# |--CPU
${offset 1}${color0}${font Poky:size=16}P${font}${offset -19}${voffset 9}${cpubar cpu0 4,18}${color}${voffset -16}${goto 32}CPU1: ${font Droid Sans:style=Bold:size=8}${color1}${cpu cpu1}%${font} ${alignr}${font Droid Sans:style=Bold:size=8}${color1}${execi 30 sensors | grep 'Core 0' | cut -c15-16}°C${color}${font} ${color2}${cpugraph cpu1 8,50 2E3436 555753}${color}
${goto 32}CPU2: ${font Droid Sans:style=Bold:size=8}${color1}${cpu cpu2}%${font} ${alignr}${font Droid Sans:style=Bold:size=8}${color1}${execi 30 sensors | grep 'Core 1' | cut -c15-16}°C${color}${font} ${color2}${cpugraph cpu2 8,50 2E3436 555753}${color}
# |--MEM
${color0}${font Poky:size=16}M${font}${color}${goto 32}${voffset -7}RAM: ${font Droid Sans:style=Bold:size=8}${color1}$memperc%${color}${font}
${offset 1}${voffset 2}${color0}${membar 4,18}${color}${goto 32}${voffset -2}F: ${font Droid Sans:style=Bold:size=8}${color2}${memeasyfree}${color}${font} U: ${font Droid Sans:style=Bold:size=8}${color2}${mem}${color}${font}
# |--PROC
${voffset 2}${color0}${font Poky:size=15}a${font}${color}${goto 32}${voffset -10}Processos: ${color2}${alignr 13}CPU${alignr}RAM${color}
${voffset -1}${goto 42}${color2}${top name 1}${color}${font Droid Sans:style=Bold:size=8}${color1} ${goto 124}${top cpu 1}${alignr }${top mem 1}${color}${font}
${voffset -1}${goto 42}${color2}${top name 2}${color}${font Droid Sans:style=Bold:size=8}${color1} ${goto 124}${top cpu 2}${alignr }${top mem 2}${color}${font}
${voffset -1}${goto 42}${color2}${top name 3}${color}${font Droid Sans:style=Bold:size=8}${color1} ${goto 124}${top cpu 3}${alignr }${top mem 3}${color}${font}
#############
# - CLOCK - #
#############
${voffset 4}${font Droid Sans:style=Bold:size=8}DATA $stippled_hr${font}
${voffset -12}${goto 28}${font Arial Black:size=38}${color2}${time %H}${color}${font}${voffset -28}${font Droid Sans:style=Bold:size=11}${color2}${time :%M}${time :%S}${color}${font}
${voffset -2}${goto 100}${font Droid Sans:style=Bold:size=8}${color2}${time %A}${color}${font}
${goto 100}${time %d %b %Y}
################
# - CALENDAR - #
################
${voffset -2}${color0}${font Poky:size=16}D${font}${voffset -8}${font Droid Sans:style=Bold:size=7}${offset -17}${voffset 4}${time %d}${font}${color}${voffset -1}${font Droid Sans Mono:size=7}${execpi 300 DJS=`date +%_d`; cal |sed '2,7!d'| sed '/./!d' | sed 's/^/${goto 32} /'| sed 's/$/ /' | sed 's/^/ /' | sed /" $DJS "/s/" $DJS "/" "'${font Droid Sans Mono:style=Bold:size=8}${voffset -1}${color1}'"$DJS"'${color}${font Droid Sans Mono:size=7}'" "/}${voffset -1}
#############
# - PHOTO - #
#############
# For a working photo widget you need to specify a file or directory in conkyPhoto or conkyPhotoRandom script in /home/roger/.conkycolors/bin /usr/share/conkycolors/bin folders
${voffset 4}${font Droid Sans:style=Bold:size=8}FOTO $stippled_hr${font}
${execi 10800 /home/roger/.conkycolors/bin/conkyPhoto}${image /tmp/conkyPhoto.png -s 175x120 -p 4,346}${voffset 114}
##############
# - NVIDIA - #
##############
${voffset 4}${font Droid Sans:style=Bold:size=8}NVIDIA $stippled_hr${font}
${color0}${voffset -4}${font Poky:size=17}N${font}${color}${goto 32}${voffset -8}GPU Temp:${alignr}${font Droid Sans:style=Bold:size=8}${color1} ${exec nvidia-settings -q GPUCoreTemp | grep Attribute | cut -d ' ' -f 6 | cut -c 1-2}${font}${color}°C
${goto 32}GPU Clock:${alignr}${font Droid Sans:style=Bold:size=8}${color1} ${exec nvidia-settings -q GPU2DClockFreqs -t}${font}${color}MHz
${goto 32}Video RAM:${alignr}${font Droid Sans:style=Bold:size=8}${color1} ${exec nvidia-settings -q VideoRam -t}${font}${color}KiB
${goto 32}Driver Version:${alignr}${font Droid Sans:style=Bold:size=8}${color1} ${exec nvidia-settings -q NvidiaDriverVersion -t}${font}${color}
##########
# - HD - #
##########
${voffset 4}${font Droid Sans:style=Bold:size=8}HD $stippled_hr${font}
${execpi 30 /usr/share/conkycolors/bin/conkyHD1}
###############
# - NETWORK - #
###############
${voffset 4}${font Droid Sans:style=Bold:size=8}REDE $stippled_hr${font}
# |--WLAN0
${if_up wlan0}
${voffset -13}${color0}${font VariShapes Solid:size=14}q${font}${color}${goto 32}${voffset -6}Up: ${font Droid Sans:style=Bold:size=8}${color1}${upspeed wlan0}${color}${font} ${alignr}${color2}${upspeedgraph wlan0 8,60 2E3436 555753}${color}
${goto 32}Total: ${font Droid Sans:style=Bold:size=8}${color2}${totalup wlan0}${color}${font}
${voffset -2}${color0}${font VariShapes Solid:size=14}Q${font}${color}${goto 32}${voffset -6}Down: ${font Droid Sans:style=Bold:size=8}${color1}${downspeed wlan0}${color}${font} ${alignr}${color2}${downspeedgraph wlan0 8,60 2E3436 555753}${color}
${goto 32}Total: ${font Droid Sans:style=Bold:size=8}${color2}${totaldown wlan0}${color}${font}
${voffset -2}${color0}${font Poky:size=14}Y${font}${color}${goto 32} ${voffset -2}Sinal: ${font Droid Sans:style=Bold:size=8}${color1}${wireless_link_qual wlan0}%${color}${font} ${alignr}${color2}${wireless_link_bar 8,60 wlan0}${color}
${voffset 4}${color0}${font Poky:size=13}w${font}${color}${goto 32}${voffset -8}Ip local: ${alignr}${color2}${addr wlan0}${color}
${goto 32}Ip externo: ${alignr}${color2}${execi 10800 /usr/share/conkycolors/bin/conkyIp}${color}
# |--ETH0
${else}${if_up eth0}
${voffset -13}${color0}${font VariShapes Solid:size=14}q${font}${color}${goto 32}${voffset -6}Up: ${font Droid Sans:style=Bold:size=8}${color1}${upspeed eth0}${color}${font} ${alignr}${color2}${upspeedgraph eth0 8,60 2E3436 555753}${color}
${goto 32}Total: ${font Droid Sans:style=Bold:size=8}${color2}${totalup eth0}${color}${font}
${voffset -2}${color0}${font VariShapes Solid:size=14}Q${font}${color}${goto 32}${voffset -6}Down: ${font Droid Sans:style=Bold:size=8}${color1}${downspeed eth0}${color}${font} ${alignr}${color2}${downspeedgraph eth0 8,60 2E3436 555753}${color}
${goto 32}Total: ${font Droid Sans:style=Bold:size=8}${color2}${totaldown eth0}${color}${font}
${voffset -2}${color0}${font Poky:size=13}w${font}${color}${goto 32}${voffset -4}Ip local: ${alignr}${color2}${addr eth0}${color}
${goto 32}Ip externo: ${alignr}${color2}${execi 10800 /usr/share/conkycolors/bin/conkyIp}${color}
# |--PPP0
${else}${if_up ppp0}
${voffset -13}${color0}${font VariShapes Solid:size=14}q${font}${color}${goto 32}${voffset -6}Up: ${font Droid Sans:style=Bold:size=8}${color1}${upspeed ppp0}${color}${font} ${alignr}${color2}${upspeedgraph ppp0 8,60 2E3436 555753}${color}
${goto 32}Total: ${font Droid Sans:style=Bold:size=8}${color2}${totalup ppp0}${color}${font}
${voffset -2}${color0}${font VariShapes Solid:size=14}Q${font}${color}${goto 32}${voffset -6}Down: ${font Droid Sans:style=Bold:size=8}${color1}${downspeed ppp0}${color}${font} ${alignr}${color2}${downspeedgraph ppp0 8,60 2E3436 555753}${color}
${goto 32}Total: ${font Droid Sans:style=Bold:size=8}${color2}${totaldown ppp0}${color}${font}
${voffset -2}${color0}${font Poky:size=13}w${font}${color}${goto 32}${voffset -4}Ip local: ${alignr}${color2}${addr ppp0}${color}
${else}${voffset 4}${color0}${font PizzaDude Bullets:size=12}4${font}${color}${goto 32}Rede indisponível${voffset 14}${endif}${endif}${endif}
###############
# - WEATHER - #
###############
# For a working weather script you NEED to define, in a user specific config file, a partner id and registration code for the weather.com xoap service. For this purpose copy .conkyForecast.config in /usr/share/conkycolors folder to your home and setup as required.
# http://www.weather.com/services/xmloap.html
${voffset -8}${font Droid Sans:style=Bold:size=8}TEMPO $stippled_hr${font}
# |--WLAN0
${if_up wlan0}
${execpi 10800 /usr/share/conkycolors/bin/conkyForecast --location=BRXX0232 -t /home/roger/.conkycolors/templates/conkyForecast.template}
# |--ETH0
${else}${if_up eth0}
${execpi 10800 /usr/share/conkycolors/bin/conkyForecast --location=BRXX0232 -t /home/roger/.conkycolors/templates/conkyForecast.template}
# |--PPP0
${else}${if_up ppp0}
${execpi 10800 /usr/share/conkycolors/bin/conkyForecast --location=BRXX0232 -t /home/roger/.conkycolors/templates/conkyForecast.template}
${else}${voffset 4}${color0}${font PizzaDude Bullets:size=12}4${font}${color}${goto 32}Tempo indisponível${voffset 14}${endif}${endif}${endif}

start_conky.sh
Spoiler:
#!/bin/bash
sleep 30
conky -c ~/.conkycolors/conkyrc &
exit 0


:ubuntued:
Editado pela última vez por Roger Braga em Sáb, 23 de Julho 2011, 2:33, em um total de 3 vezes.

AGARB REGOR


Imagem
:ubuntued: "Somente seres humanos excepcionais e irrepreensíveis suscitam ideias generosas e ações elevadas. O conhecimento é limitado. A imaginação envolve ao mundo."
:ubuntued:
Avatar do usuário
Roger Braga
Mr. Deskmod
 
Mensagens: 755
Registrado em: 04 Julho, 2011
Localização: São Paulo, BRASIL

Re: Configurações Conky

Mensagempor zardos666 » Qui, 21 de Julho 2011, 23:10

Neste momento tenho um conky que tem uma linha apenas :P pareceu me simples e diferente, gostei e agora pronto :P



Spoiler:
# Locale, fonts and font sizes.
use_xft yes
xftfont Droid Sans:size=9
override_utf8_locale yes

# Conky performance
update_interval 1
total_run_times 0
double_buffer yes
no_buffers yes
net_avg_samples 2
text_buffer_size 1024

# Execute it in its own window
own_window yes
own_window_transparent yes
own_window_type override
own_window_hints undecorated,below,sticky,skip_taskbar,skip_pager

#position
gap_x 6
gap_y 6
alignment top_left

#behaviour
update_interval 1

#colour
default_color 8f8f8f
#default_shade_color 000000
own_window_colour 262626

#font
use_xft yes
xftfont bauhaus:pixelsize=10

#to prevent window from moving
use_spacer no
minimum_size 1268 0

#mpd
mpd_host localhost
mpd_port 6600

TEXT
${voffset -1} Cpu: ${color e0e0e0}${font}${cpu}% ${goto 60} ${execi 8 sensors | grep -A 0 'CPU Temperature' | cut -c21-24} ºC${color} ${goto 110} | Mem: ${color e0e0e0}${font}$memperc% ${color} | ${color} Download: ${color e0e0e0}${font}${downspeed eth0} ${goto 290} ${color} | ${totaldown eth0} Downloaded${color} | ${color} ${goto 410} Upload: ${color e0e0e0}${upspeed eth0} ${goto 500} ${color} | ${totalup eth0} uploaded${color} ${goto 615} | ${color} Home: ${color e0e0e0}${font}${fs_free /home} ${color} | ${color} Local IP: ${color e0e0e0}${font}${addr eth0} | ${color} Public IP: ${color e0e0e0}${font}${curl ifconfig.me}


Depois tenho o ficheiro start.sh pa resolver alguns problemas do conky quando o pc liga :P

Spoiler:
#!/bin/bash

sleep 17 && conky -c CAMINHO_PARAO_CONKY/conkyrc


Atenção: Devem de alterar o caminho neste ficheiro para a pasta onde está o vosso conkyrc. Por fim é so adicionar o start.sh ao arranque :D

A configuração original foi baixada de: http://gnome-look.org/content/show.php/Conky+scripts?content=52896

Mas tinha coisaas a mais e coisas a menos...
Um problema da configuração original é a falta de larguras defenidas ou seja, ha algo no conky a dizer: 9%, e logo a seguir aparece outra coisa... se este 9 passar para um 10 tudo que está a direita que se mover para haver espaço para o 10, nao sei se fui muito claro, mas nao consigo ser mais xD O meu ficheiro tem isso resolvido :D

zardos666
 
Mensagens: 28
Registrado em: 10 Junho, 2011

Re: Partilhe a configuração do seu Conky

Mensagempor Roger Braga » Sex, 22 de Julho 2011, 21:34

Conky lua Next generation

conkyrc
Spoiler:
# Conky settings #
background no
update_interval 1

cpu_avg_samples 2
net_avg_samples 2

override_utf8_locale yes

double_buffer yes
no_buffers yes

text_buffer_size 2048
#imlib_cache_size 0

temperature_unit fahrenheit

# Window specifications #

own_window yes
own_window_type override
own_window_transparent yes
own_window_hints undecorate,sticky,skip_taskbar,skip_pager,below

border_inner_margin 0
border_outer_margin 0

minimum_size 200 250
maximum_width 200

alignment tr
gap_x 35
gap_y 55

# Graphics settings #
draw_shades no
draw_outline no
draw_borders no
draw_graph_borders no

# Text settings #
use_xft yes
override_utf8_locale yes
xftfont Neuropolitical:size=8
xftalpha 0.8
uppercase no

temperature_unit celsius

default_color 8A2BE2

# Lua Load #
lua_load ~/.lua/scripts/clock_rings.lua
lua_draw_hook_pre clock_rings

TEXT
${font Neuropolitical:size=42}${time %e}
${goto 100}${font Neuropolitical:size=18}${color 8A2BE2}${voffset -75}${time %b}
${font Neuropolitical:size=10}${color 8A2BE2}${voffset 15}${time %A}${color 8A2BE2}${hr}
${goto 100}${font Neuropolitical:size=15}${color FFFFFF}${voffset -35}${time %Y}
${font Neuropolitical:size=30}${voffset 40}${alignc}${time %H}:${time %M}
${goto 175}${voffset -30}${font Neuropolitical:size=10}${time %S}
${voffset 10}${font Neuropolitical:size=11}${color 8A2BE2}${alignr}HOME${font}
${font Neuropolitical:size=13}${color FFFFFF}${alignr}temp: ${weather http://weather.noaa.gov/pub/data/observ ... /stations/ SBSP temperature temperature 30} °C${font}
${hr}
${image ~/.conky/logo.png -p 145,10 -s 50x50}
${color FFFFFF}${font Neuropolitical:size=8}Uptime: ${uptime_short}
${color FFFFFF}${font Neuropolitical:size=8}Processes: ${processes}
${color FFFFFF}${font Neuropolitical:size=8}Running: ${running_processes}

${color 8A2BE2}${goto 125}${voffset 27}CPU
${color FFFFFF}${goto 125}${cpu cpu0}%
${color 8A2BE2}${goto 125}${voffset 55}RAM
${color FFFFFF}${goto 125}${memperc}%
${color 8A2BE2}${goto 125}${voffset 56}Swap
${color FFFFFF}${goto 125}${swapperc}%
${color 8A2BE2}${goto 125}${voffset 57}Disk
${color FFFFFF}${goto 125}${fs_used_perc /}%
${color 8A2BE2}${goto 130}${voffset 55}Net
${color FFFFFF}${goto 130}${downspeed eth0}
${color FFFFFF}${goto 130}${upspeed eth0}

${color 8A2BE2}${font Neuropolitical:size=8}${alignr}${nodename}
${color 8A2BE2}${font Neuropolitical:size=8}${alignr}${pre_exec cat /etc/issue.net} $machine
${color 8A2BE2}${font Neuropolitical:size=8}${alignr}Kernel: ${kernel}
${hr}

clock_rings.lua

Spoiler:
--[[
Clock Rings by Linux Mint (2011) reEdited by despot77

This script draws percentage meters as rings, and also draws clock hands if you want! It is fully customisable; all options are described in the script. This script is based off a combination of my clock.lua script and my rings.lua script.

IMPORTANT: if you are using the 'cpu' function, it will cause a segmentation fault if it tries to draw a ring straight away. The if statement on line 145 uses a delay to make sure that this doesn't happen. It calculates the length of the delay by the number of updates since Conky started. Generally, a value of 5s is long enough, so if you update Conky every 1s, use update_num>5 in that if statement (the default). If you only update Conky every 2s, you should change it to update_num>3; conversely if you update Conky every 0.5s, you should use update_num>10. ALSO, if you change your Conky, is it best to use "killall conky; conky" to update it, otherwise the update_num will not be reset and you will get an error.

To call this script in Conky, use the following (assuming that you save this script to ~/scripts/rings.lua):
lua_load ~/scripts/clock_rings.lua
lua_draw_hook_pre clock_rings

Changelog:
+ v1.0 -- Original release (30.09.2009)
v1.1p -- Jpope edit londonali1010 (05.10.2009)
*v Mint-lua -- reEdit despot77 (18.02.2011)
]]

settings_table = {

{
name='cpu',
arg='cpu0',
max=100,
bg_colour=0xffffff,
bg_alpha=0.2,
fg_colour=0x8A2BE2,
fg_alpha=0.8,
x=163, y=280,
radius=25,
thickness=25,
start_angle=-90,
end_angle=180
},
{
name='memperc',
arg='',
max=100,
bg_colour=0xffffff,
bg_alpha=0.2,
fg_colour=0x8A2BE2,
fg_alpha=0.8,
x=163, y=360,
radius=25,
thickness=25,
start_angle=-90,
end_angle=180
},
{
name='swapperc',
arg='',
max=100,
bg_colour=0xffffff,
bg_alpha=0.2,
fg_colour=0x8A2BE2,
fg_alpha=0.8,
x=163, y=440,
radius=25,
thickness=25,
start_angle=-90,
end_angle=180
},
{
name='fs_used_perc',
arg='/',
max=100,
bg_colour=0xffffff,
bg_alpha=0.2,
fg_colour=0x8A2BE2,
fg_alpha=0.8,
x=163, y=520,
radius=25,
thickness=25,
start_angle=-90,
end_angle=180
},
{
name='downspeedf',
arg='eth0',
max=210,
bg_colour=0xffffff,
bg_alpha=0.2,
fg_colour=0x8A2BE2,
fg_alpha=0.8,
x=165, y=600,
radius=30,
thickness=12,
start_angle=-90,
end_angle=180
},
{
name='upspeedf',
arg='eth0',
max=100,
bg_colour=0xffffff,
bg_alpha=0.2,
fg_colour=0x8A2BE2,
fg_alpha=0.8,
x=165, y=600,
radius=16,
thickness=12,
start_angle=-90,
end_angle=180
},
}

-- Use these settings to define the origin and extent of your clock.

clock_r=65

-- "clock_x" and "clock_y" are the coordinates of the centre of the clock, in pixels, from the top left of the Conky window.

clock_x=100
clock_y=150

show_seconds=true

require 'cairo'

function rgb_to_r_g_b(colour,alpha)
return ((colour / 0x10000) % 0x100) / 255., ((colour / 0x100) % 0x100) / 255., (colour % 0x100) / 255., alpha
end

function draw_ring(cr,t,pt)
local w,h=conky_window.width,conky_window.height

local xc,yc,ring_r,ring_w,sa,ea=pt['x'],pt['y'],pt['radius'],pt['thickness'],pt['start_angle'],pt['end_angle']
local bgc, bga, fgc, fga=pt['bg_colour'], pt['bg_alpha'], pt['fg_colour'], pt['fg_alpha']

local angle_0=sa*(2*math.pi/360)-math.pi/2
local angle_f=ea*(2*math.pi/360)-math.pi/2
local t_arc=t*(angle_f-angle_0)

-- Draw background ring

cairo_arc(cr,xc,yc,ring_r,angle_0,angle_f)
cairo_set_source_rgba(cr,rgb_to_r_g_b(bgc,bga))
cairo_set_line_width(cr,ring_w)
cairo_stroke(cr)

-- Draw indicator ring

cairo_arc(cr,xc,yc,ring_r,angle_0,angle_0+t_arc)
cairo_set_source_rgba(cr,rgb_to_r_g_b(fgc,fga))
cairo_stroke(cr)
end

function draw_clock_hands(cr,xc,yc)
local secs,mins,hours,secs_arc,mins_arc,hours_arc
local xh,yh,xm,ym,xs,ys

secs=os.date("%S")
mins=os.date("%M")
hours=os.date("%I")

secs_arc=(2*math.pi/60)*secs
mins_arc=(2*math.pi/60)*mins+secs_arc/60
hours_arc=(2*math.pi/12)*hours+mins_arc/12

end

function conky_clock_rings()
local function setup_rings(cr,pt)
local str=''
local value=0

str=string.format('${%s %s}',pt['name'],pt['arg'])
str=conky_parse(str)

value=tonumber(str)
pct=value/pt['max']

draw_ring(cr,pct,pt)
end

-- Check that Conky has been running for at least 5s

if conky_window==nil then return end
local cs=cairo_xlib_surface_create(conky_window.display,conky_window.drawable,conky_window.visual, conky_window.width,conky_window.height)

local cr=cairo_create(cs)

local updates=conky_parse('${updates}')
update_num=tonumber(updates)

if update_num>5 then
for i in pairs(settings_table) do
setup_rings(cr,settings_table[i])
end
end

draw_clock_hands(cr,clock_x,clock_y)
end

Imagen OBS:colocar a imagen na pasta de caminho do conkyrc

Arquivo original http://gnome-look.org/content/show.php/Conky+lua++++2011+next+generation?content=141411 :ubuntued:

AGARB REGOR


Imagem
:ubuntued: "Somente seres humanos excepcionais e irrepreensíveis suscitam ideias generosas e ações elevadas. O conhecimento é limitado. A imaginação envolve ao mundo."
:ubuntued:
Avatar do usuário
Roger Braga
Mr. Deskmod
 
Mensagens: 755
Registrado em: 04 Julho, 2011
Localização: São Paulo, BRASIL

Re: Partilhe a configuração do seu Conky!!

Mensagempor Claudio Novais » Sáb, 23 de Julho 2011, 1:27

Minha contribuição para o tópico! Houve um pequeno Conky que eu fiz com base noutros, que não me recordo quais, para chegar a um visual que fiz na única vez que o Pedro não teve disponibilidade para contribuir para a Série de Visuais do Ubuntued. O Conky resultante tem o seguinte aspeto, extremamente simplista mas, na minha opinião, bastante efetivo na apresentação dos dados:
Imagem

A configuração é das mais simples que se pode ter para o Conky e não requer qualquer tipo de modificação:
Spoiler:
Código: Selecionar todos
background yes
own_window yes
own_window_type override
own_window_transparent yes
own_window_hints undecorated,below,sticky,skip_taskbar,skip_pager
double_buffer yes
use_spacer none
use_xft yes
xftfont ubuntu:size=13
xftalpha 1
update_interval 1.0
draw_shades yes
default_shade_color 665041
draw_outline no # amplifies text if yes
draw_borders no
uppercase no
border_margin 3
minimum_size 100

default_color white
own_window_colour brown
own_window_transparent yes

alignment bottom_middle

gap_x 0
gap_y 0
# Subtract file system buffers from used memory?
no_buffers yes

#This setup uses a graffitistyle font (Bring tha noize) to display -time -cpu% -free space% -free ram%. Behind each stat is a digbat font (the B.O.M.B. (Best Of Magurno Brushes)) with a kind of paint splatter effect.

TEXT

${color 6d124d}CPU ${color ffffff}${CPU}%${goto 120}${color 6d124d}HDD ${color ffffff}${fs_used}/${fs_size}${offset 50}${color 6d124d}RAM ${color ffffff}${mem}/${memmax}


Página original desta configuração do Conky:
http://ubuntued.info/tema-54-um-horizon ... te-simples
Avatar do usuário
Claudio Novais
Editor do Ubuntued
 
Mensagens: 16869
Registrado em: 25 Maio, 2011

Re: Partilhe a configuração do seu Conky!!

Mensagempor Roger Braga » Sáb, 23 de Julho 2011, 2:27

CONKYCOLORS BLUE


conkyrc
Spoiler:
# Use Xft?
use_xft yes
xftfont DejaVu Sans:size=7
xftalpha 0.8
text_buffer_size 2048

# Update interval in seconds
update_interval 1

# This is the number of times Conky will update before quitting.
# Set to zero to run forever.
total_run_times 0

# Create own window instead of using desktop (required in nautilus)
own_window yes
own_window_transparent yes
own_window_type override
#own_window_hints undecorated,below,sticky,skip_taskbar,skip_pager

# Use double buffering (reduces flicker, may not work for everyone)
double_buffer yes

# Minimum size of text area
minimum_size 180 0
#maximum_width 200

# Draw shades?
draw_shades yes

# Draw outlines?
draw_outline no

# Draw borders around text
draw_borders no

# Default colors and also border colors
default_color CCFFFF
default_shade_color black
#default_outline_color white
own_window_colour white

# Text alignment, other possible values are commented
#alignment top_left
alignment top_right
#alignment bottom_left
#alignment bottom_right

# Gap between borders of screen and text
# same thing as passing -x at command line
gap_x 5
gap_y 20

# Subtract file system buffers from used memory?
no_buffers yes

# set to yes if you want all text to be in uppercase
uppercase no

# number of cpu samples to average
# set to 1 to disable averaging
cpu_avg_samples 2

# number of net samples to average
# set to 1 to disable averaging
net_avg_samples 2

# Force UTF8? note that UTF8 support required XFT
override_utf8_locale yes

# Add spaces to keep things from moving about? This only affects certain objects.
use_spacer none

TEXT
${color CCFFFF}SISTEMA ${hr 2}${color}
${voffset 2}${font OpenLogos:size=20}B${font} Kernel: ${alignr}${kernel}

CPU0: ${cpu cpu0}% ${alignr}CPU1: ${cpu cpu1}%
${alignc} ${cpugraph cpu1 8,75 773377 0099FF} ${cpugraph cpu2 8,75 0099FF 773377}
${font StyleBats:size=16}g${font} RAM: $memperc% ${alignr}${membar 8,60}


${color CCFFFF}DATA ${hr 2}${color}
${alignc 25}${font Arial Black:size=20}${time %H:%M}${font}
${alignc}${time %A %d, %B %Y}

${color CCFFFF}HD ${hr 2}${color}
${voffset 4}${font Pie charts for maps:size=14}7${font} ${voffset -5}Root:
${voffset 4}${fs_used /}/${fs_size /} ${alignr}${fs_bar 8,60 /}
${font Pie charts for maps:size=14}7${font} ${voffset -5}Home:
${voffset 4}${fs_free /home}/${fs_size /home} ${alignr}${fs_bar 8,60 /home}

${color CCFFFF}REDE ${hr 2}${color}
${if_existing /proc/net/route ra0}
${voffset -6}${font PizzaDude Bullets:size=14}O${font} Up: ${upspeed ra0} kb/s ${alignr}${upspeedgraph ra0 8,60 789E2D A7CC5C}
${voffset 4}${font PizzaDude Bullets:size=14}U${font} Down: ${downspeed ra0} kb/s ${alignr}${downspeedgraph ra0 8,60 789E2D A7CC5C}
${voffset 4}${font PizzaDude Bullets:size=14}N${font} Upload: ${alignr}${totalup ra0}
${voffset 4}${font PizzaDude Bullets:size=14}T${font} Download: ${alignr}${totaldown ra0}
${voffset 4}${font PizzaDude Bullets:size=14}Z${font} Senyal: ${wireless_link_qual ra0}% ${alignr}${wireless_link_bar 8,60 ra0}
${voffset 4}${font PizzaDude Bullets:size=14}a${font} Ip Local: ${alignr}${addr ra0}
${voffset 4}${font PizzaDude Bullets:size=14}b${font} Ip Pública: ${alignr}${pre_exec wget http://checkip.dyndns.org/ -q -O - | grep -Eo '\<[[:digit:]]{1,3}(\.[[:digit:]]{1,3}){3}\>'}
${else}${if_existing /proc/net/route eth0}
${voffset -6}${font PizzaDude Bullets:size=14}O${font} Up: ${upspeed eth0} kb/s ${alignr}${upspeedgraph eth0 8,60 789E2D A7CC5C}
${voffset 4}${font PizzaDude Bullets:size=14}U${font} Down: ${downspeed eth0} kb/s ${alignr}${downspeedgraph eth0 8,60 789E2D A7CC5C}
${voffset 4}${font PizzaDude Bullets:size=14}N${font} Upload: ${alignr}${totalup eth0}
${voffset 4}${font PizzaDude Bullets:size=14}T${font} Download: ${alignr}${totaldown eth0}
${voffset 4}${font PizzaDude Bullets:size=14}a${font} Ip Local: ${alignr}${addr eth0}
${voffset 4}${font PizzaDude Bullets:size=14}b${font} Ip Pública: ${alignr}${pre_exec wget http://checkip.dyndns.org/ -q -O - | grep -Eo '\<[[:digit:]]{1,3}(\.[[:digit:]]{1,3}){3}\>'}

##################
## WEATHER ##
##################
${voffset 6}${font WenQuanYiMicroHei:bold:size=8.75}${color}WEATHER${offset 8}${color}${voffset -2}${hr 2}${font}
${voffset 0}${goto 59}${font Weather:size=38}${color}y${font}${voffset -33}${offset 14}${font RadioSpace:size=32}${color}${execpi 1800 conkyForecast --location=BRXX0232}${font}
${voffset 0}${font Ubuntu:size=24}${color}${alignc}${execi 1800 conkyForecast --location=BRXX0232 --datatype=CT}${font}
${voffset 15}${goto 20}${font ConkyWindNESW:style=Bold:size=38}${color}${execi 1800 conkyForecast --location=BRXX0232 --datatype=BS}${font}${voffset -45}${goto 95}${font ConkyWeather:style=Bold:size=45}${color}${execi 1800 conkyForecast --location=BRXX0232 --datatype=WF}${font}${voffset -30}${goto 185}${font MoonPhases:size=30}${color}${execi 1800 conkyForecast --location=BRXX0232 --datatype=MF}${font}
${voffset 2}${goto 28}${font}${color}${execpi 1800 conkyForecast --location=BRXX0232 --datatype=WS | sed -e 's/calm'/'\$\{offset 2}Calm/g' -e 's/mph'/'\$\{offset 2}mph/g'}${goto 89}Feels like ${execi 1800 conkyForecast --location=BRXX0232 --datatype=LT --centeredwidth=4 -iu}${execpi 1800 conkyForecast --location=BRXX0232 --datatype=MP | sed -e 's/First.*'/'\$\{goto 185}First Qtr/g' -e 's/Last.*'/'\$\{goto 185}Last Qtr/g' -e 's/New.*'/'\$\{goto 190}New/g' -e 's/Full.*'/'\$\{goto 194}Full/g' -e 's/Waning.*'/'\$\{goto 185}Waning/g' -e 's/Waxing.*'/'\$\{goto 185}Waxing/g'}${font}
${voffset 10}${goto 35}${font}${color}${execi 1800 conkyForecast --location=BRXX0232 --datatype=DW --startday=1 --shortweekday}${goto 89}${execi 1800 conkyForecast --location=BRXX0232 --datatype=DW --startday=2 --shortweekday}${goto 142}${execi 1800 conkyForecast --location=BRXX0232 --datatype=DW --startday=3 --shortweekday}${goto 196}${execi 1800 conkyForecast --location=BRXX0232 --datatype=DW --startday=4 --shortweekday}${font}
${voffset 0}${goto 25}${font ConkyWeather:size=32}${color}${execi 1800 conkyForecast --location=BRXX0232 --datatype=WF --startday=1 --endday=4 --spaces=1}${font}
${voffset 0}${goto 25}${font}${color}${execi 1800 conkyForecast --location=BRXX0232 --datatype=HT --startday=1 --hideunits --centeredwidth=4 -iu}/${offset 4}${execi 1800 conkyForecast --location=BRXX0232 --datatype=LT --startday=1 --hideunits --centeredwidth=4 -iu}${goto 79}${execi 1800 conkyForecast --location=BRXX0232 --datatype=HT --startday=2 --hideunits --centeredwidth=4 -iu}/${offset 4}${execi 1800 conkyForecast --location=BRXX0232 --datatype=LT --startday=2 --hideunits --centeredwidth=4 -iu}${goto 133}${execi 1800 conkyForecast --location=BRXX0232 --datatype=HT --startday=3 --hideunits --centeredwidth=4 -iu}/${offset 4}${execi 1800 conkyForecast --location=BRXX0232 --datatype=LT --startday=3 --hideunits --centeredwidth=4 -iu}${goto 187}${execi 1800 conkyForecast --location=BRXX0232 --datatype=HT --startday=4 --hideunits --centeredwidth=4 -iu}/${offset 4}${execi 1800 conkyForecast --location=BRXX0232 --datatype=LT --startday=4 --hideunits --centeredwidth=4 -iu}${font}
##################
## CALENDAR ##
##################
${voffset 6}${font WenQuanYiMicroHei:bold:size=8.75}${color}DATE${offset 8}${color}${voffset -2}${hr 2}${font}
${voffset 18}${font LiberationMono:size=8}${color}${alignc 59}${time %A}${font}
${voffset -3}${font LiberationMono:size=22}${color}${alignc 58}${time %d}${font}
${voffset -1}${font LiberationMono:size=8}${color}${alignc 58}${time %B}${font}
${voffset -4}${font LiberationMono:size=8}${color}${alignc 58}${time %Y}${font}
${voffset -76}${font CutOutsFor3DFX:size=62}${color}${alignc 94}2${font}
${voffset -69}${font LiberationMono:size=8}${color}${execpi 1800 VinDSL_Cal3= cal | sed '1d' | sed s/^/"\$\{offset 100"\}/ | sed '/^ *$/d' | sed 's/\<'"$(date +%-d)"'\>/${color4}&${color}/'}${font}
##################
# TOP PROCESSES ##
##################
${voffset 3}${font WenQuanYiMicroHei:bold:size=8.75}${color}TOP PROCESSES${offset 8}${color}${voffset -2}${hr 2}${font}
${voffset 4}${font StyleBats:size=10}${color}h${voffset -3}${font}${color}${offset 5}${top_mem name 1}${goto 115}${top_mem mem_res 1}${alignr}${top_mem mem 1}%
${voffset 2}${font StyleBats:size=10}${color}h${voffset -3}${font}${color}${offset 5}${top_mem name 2}${goto 115}${top_mem mem_res 2}${alignr}${top_mem mem 2}%
${voffset 2}${font StyleBats:size=10}${color}h${voffset -3}${font}${color}${offset 5}${top_mem name 3}${goto 115}${top_mem mem_res 3}${alignr}${top_mem mem 3}%
${voffset 2}${font StyleBats:size=10}${color}h${voffset -3}${font}${color}${offset 5}${top_mem name 4}${goto 115}${top_mem mem_res 4}${alignr}${top_mem mem 4}%
${voffset 2}${font StyleBats:size=10}${color}h${voffset -3}${font}${color}${offset 5}${top_mem name 5}${goto 115}${top_mem mem_res 5}${alignr}${top_mem mem 5}%

##################
## LOGO ##
##################
${voffset -33}${font OpenLogos:size=103}${color}v${font}${voffset -76}${goto 178}${font UbuntuTitleBold:size=20}${color}10.10${font}
##################

OBS:prestar muita atenção as fontes :ubuntued:

AGARB REGOR


Imagem
:ubuntued: "Somente seres humanos excepcionais e irrepreensíveis suscitam ideias generosas e ações elevadas. O conhecimento é limitado. A imaginação envolve ao mundo."
:ubuntued:
Avatar do usuário
Roger Braga
Mr. Deskmod
 
Mensagens: 755
Registrado em: 04 Julho, 2011
Localização: São Paulo, BRASIL

Re: Partilhe a configuração do seu Conky!!

Mensagempor Miguel Fonseca » Sáb, 23 de Julho 2011, 5:39

Conkys utilizados para esta apresentação:

- http://gnome-look.org/content/show.php/Conky+lua?content=139024 (este é o "conky lua" original mas foi modificado por mim).

- http://gnome-look.org/content/show.php/Conky_Ken?content=134705 (este é o "conky ken" original, mas só utilizei o ficheiro "rings" e foi modificado por mim)

- http://ubuntued.info/conky-o-gestor-de-sistema-para-a-area-de-trabalho (o conky forecast que está nos repositórios do Ubuntu) e aqui têm o tutorial da configuração do mesmo em inglês http://ubuntuforums.org/showthread.php?t=869328 )



TOQUES DE AZUL



Imagem




Começo por dizer que vou aqui postar os códigos do que utilizei para fazer este conky, excepto o código do "conky forecast" porque, como referi em cima, o mesmo encontra-se nos repositórios do Ubuntu.

Então vamos lá! Primeiro, criem uma pasta com o nome ".lua" (ponham o ponto antes do lua para o ficheiro ficar oculto evitando assim que o eliminem acidentalmente) na vossa pasta pessoal.

Depois, dentro desta nova pasta (.lua), criem outra com o nome "scripts" (nesta não é preciso o ponto antes do nome).

Em seguida, copiem para dentro da pasta scripts os ficheiros todos (os três abaixo indicados e com o respectivo código).

Então, no ficheiro "startconky.sh", cliquem com o botão do lado direito do rato e em permissões, escolham "permitir executar o ficheiro como uma aplicação" e façam "ok".

Finalmente para o vosso conky arrancar com o Ubuntu (ou outra distribuição Debian), vão ao Menu Sistema-Preferências-Aplicações de Arranque e cliquem em Adicionar. Vai aparecer uma janela com três campos para preencher.

- Nome: Podem por o que quiserem por exemplo - Arranque do Conky

- Comando: Aqui navegam até à pasta onde está o ficheiro "startconky.sh", ou seja /PastaPessoal (carregam em Ctrl+H para verem os ficheiros ocultos) /.lua/scripts e depois dão dois cliques no ficheiro "startconky.sh" que ele vai aparecer (o caminho para ele) no campo de Comando automaticamente.

- Comentário: Também podem por o que quiserem por exemplo - Atraso no Arranque do Conky.


E já está! Alguma dúvida é só perguntar.


Código do clock_rings.lua (clock_rings.lua é o nome a dar ao ficheiro)
Spoiler:
--[[
Clock Rings by Linux Mint (2011) reEdited by despot77

This script draws percentage meters as rings, and also draws clock hands if you want! It is fully customisable; all options are described in the script. This script is based off a combination of my clock.lua script and my rings.lua script.

IMPORTANT: if you are using the 'cpu' function, it will cause a segmentation fault if it tries to draw a ring straight away. The if statement on line 145 uses a delay to make sure that this doesn't happen. It calculates the length of the delay by the number of updates since Conky started. Generally, a value of 5s is long enough, so if you update Conky every 1s, use update_num>5 in that if statement (the default). If you only update Conky every 2s, you should change it to update_num>3; conversely if you update Conky every 0.5s, you should use update_num>10. ALSO, if you change your Conky, is it best to use "killall conky; conky" to update it, otherwise the update_num will not be reset and you will get an error.

To call this script in Conky, use the following (assuming that you save this script to ~/scripts/rings.lua):
lua_load ~/scripts/clock_rings.lua
lua_draw_hook_pre clock_rings

Changelog:
+ v1.0 -- Original release (30.09.2009)
v1.1p -- Jpope edit londonali1010 (05.10.2009)
*v 2011mint -- reEdit despot77 (18.02.2011)
]]

settings_table = {
{
-- Edit this table to customise your rings.
-- You can create more rings simply by adding more elements to settings_table.
-- "name" is the type of stat to display; you can choose from 'cpu', 'memperc', 'fs_used_perc', 'battery_used_perc'.
name='time',
-- "arg" is the argument to the stat type, e.g. if in Conky you would write ${cpu cpu0}, 'cpu0' would be the argument. If you would not use an argument in the Conky variable, use ''.
arg='%I.%M',
-- "max" is the maximum value of the ring. If the Conky variable outputs a percentage, use 100.
max=12,
-- "bg_colour" is the colour of the base ring.
bg_colour=0xffffff,
-- "bg_alpha" is the alpha value of the base ring.
bg_alpha=0.1,
-- "fg_colour" is the colour of the indicator part of the ring.
fg_colour=0xffffff,
-- "fg_alpha" is the alpha value of the indicator part of the ring.
fg_alpha=0.2,
-- "x" and "y" are the x and y coordinates of the centre of the ring, relative to the top left corner of the Conky window.
x=140, y=250,
-- "radius" is the radius of the ring.
radius=50,
-- "thickness" is the thickness of the ring, centred around the radius.
thickness=5,
-- "start_angle" is the starting angle of the ring, in degrees, clockwise from top. Value can be either positive or negative.
start_angle=0,
-- "end_angle" is the ending angle of the ring, in degrees, clockwise from top. Value can be either positive or negative, but must be larger than start_angle.
end_angle=360
},
{
name='time',
arg='%I.%M',
max=12,
bg_colour=0xffffff,
bg_alpha=0.1,
fg_colour=0xffffff,
fg_alpha=0.2,
x=140, y=250,
radius=56,
thickness=5,
start_angle=0,
end_angle=360
},
{
name='time',
arg='%M%S',
max=60,
bg_colour=0xffffff,
bg_alpha=0.1,
fg_colour=0xffffff,
fg_alpha=0.4,
x=140, y=250,
radius=56,
thickness=5,
start_angle=0,
end_angle=360
},
{
name='time',
arg='%S',
max=60,
bg_colour=0xffffff,
bg_alpha=0.1,
fg_colour=0xffffff,
fg_alpha=0.6,
x=140, y=250,
radius=62,
thickness=5,
start_angle=-0,
end_angle=360
},
{
name='time',
arg='%m',
max=12,
bg_colour=0xffffff,
bg_alpha=0.2,
fg_colour=0xffffff,
fg_alpha=0.5,
x=140, y=250,
radius=78.5,
thickness=10,
start_angle=-0,
end_angle=360
},
{
name='cpu',
arg='cpu0',
max=100,
bg_colour=0xffffff,
bg_alpha=0.2,
fg_colour=0xffffff,
fg_alpha=0.8,
x=50, y=399,
radius=35,
thickness=4,
start_angle=-90,
end_angle=180
},
{
name='cpu',
arg='cpu1',
max=100,
bg_colour=0xffffff,
bg_alpha=0.2,
fg_colour=0xffffff,
fg_alpha=0.8,
x=50, y=399,
radius=30,
thickness=4,
start_angle=-90,
end_angle=180
},
{
name='memperc',
arg='',
max=100,
bg_colour=0xffffff,
bg_alpha=0.2,
fg_colour=0xffffff,
fg_alpha=0.8,
x=130, y=407,
radius=25,
thickness=5,
start_angle=-90,
end_angle=180
},
{
name='swapperc',
arg='',
max=100,
bg_colour=0xffffff,
bg_alpha=0.2,
fg_colour=0xffffff,
fg_alpha=0.8,
x=200, y=407,
radius=25,
thickness=5,
start_angle=-90,
end_angle=180
},
{
name='fs_used_perc',
arg='/',
max=100,
bg_colour=0xffffff,
bg_alpha=0.2,
fg_colour=0xffffff,
fg_alpha=0.8,
x=130, y=508,
radius=25,
thickness=5,
start_angle=-90,
end_angle=180
},
{
name='downspeedf',
arg='wlan0',
max=2000,
bg_colour=0xffffff,
bg_alpha=0.2,
fg_colour=0x339900,
fg_alpha=0.8,
x=50, y=500,
radius=35,
thickness=4,
start_angle=-90,
end_angle=180
},
{
name='upspeedf',
arg='wlan0',
max=500,
bg_colour=0xffffff,
bg_alpha=0.2,
fg_colour=0xffffff,
fg_alpha=0.8,
x=50, y=500,
radius=30,
thickness=4,
start_angle=-90,
end_angle=180
},
}

-- Use these settings to define the origin and extent of your clock.

clock_r=125

-- "clock_x" and "clock_y" are the coordinates of the centre of the clock, in pixels, from the top left of the Conky window.

clock_x=140
clock_y=250

clock_colour=0xffffff
clock_alpha=0.5

show_seconds=true

require 'cairo'

function rgb_to_r_g_b(colour,alpha)
return ((colour / 0x10000) % 0x100) / 255., ((colour / 0x100) % 0x100) / 255., (colour % 0x100) / 255., alpha
end

function draw_ring(cr,t,pt)
local w,h=conky_window.width,conky_window.height

local xc,yc,ring_r,ring_w,sa,ea=pt['x'],pt['y'],pt['radius'],pt['thickness'],pt['start_angle'],pt['end_angle']
local bgc, bga, fgc, fga=pt['bg_colour'], pt['bg_alpha'], pt['fg_colour'], pt['fg_alpha']

local angle_0=sa*(2*math.pi/360)-math.pi/2
local angle_f=ea*(2*math.pi/360)-math.pi/2
local t_arc=t*(angle_f-angle_0)

-- Draw background ring

cairo_arc(cr,xc,yc,ring_r,angle_0,angle_f)
cairo_set_source_rgba(cr,rgb_to_r_g_b(bgc,bga))
cairo_set_line_width(cr,ring_w)
cairo_stroke(cr)

-- Draw indicator ring

cairo_arc(cr,xc,yc,ring_r,angle_0,angle_0+t_arc)
cairo_set_source_rgba(cr,rgb_to_r_g_b(fgc,fga))
cairo_stroke(cr)
end

function draw_clock_hands(cr,xc,yc)
local secs,mins,hours,secs_arc,mins_arc,hours_arc
local xh,yh,xm,ym,xs,ys

secs=os.date("%S")
mins=os.date("%M")
hours=os.date("%I")

secs_arc=(2*math.pi/60)*secs
mins_arc=(2*math.pi/60)*mins+secs_arc/60
hours_arc=(2*math.pi/12)*hours+mins_arc/12

-- Draw hour hand

xh=xc+0.7*clock_r*math.sin(hours_arc)
yh=yc-0.7*clock_r*math.cos(hours_arc)
cairo_move_to(cr,xc,yc)
cairo_line_to(cr,xh,yh)

cairo_set_line_cap(cr,CAIRO_LINE_CAP_ROUND)
cairo_set_line_width(cr,5)
cairo_set_source_rgba(cr,1.0,1.0,1.0,1.0)
cairo_stroke(cr)

-- Draw minute hand

xm=xc+clock_r*math.sin(mins_arc)
ym=yc-clock_r*math.cos(mins_arc)
cairo_move_to(cr,xc,yc)
cairo_line_to(cr,xm,ym)

cairo_set_line_width(cr,3)
cairo_stroke(cr)

-- Draw seconds hand

if show_seconds then
xs=xc+clock_r*math.sin(secs_arc)
ys=yc-clock_r*math.cos(secs_arc)
cairo_move_to(cr,xc,yc)
cairo_line_to(cr,xs,ys)

cairo_set_line_width(cr,1)
cairo_stroke(cr)
end
end

function conky_clock_rings()
local function setup_rings(cr,pt)
local str=''
local value=0

str=string.format('${%s %s}',pt['name'],pt['arg'])
str=conky_parse(str)

value=tonumber(str)
if value == nil then value = 0 end
pct=value/pt['max']

draw_ring(cr,pct,pt)
end

-- Check that Conky has been running for at least 5s

if conky_window==nil then return end
local cs=cairo_xlib_surface_create(conky_window.display,conky_window.drawable,conky_window.visual, conky_window.width,conky_window.height)

local cr=cairo_create(cs)

local updates=conky_parse('${updates}')
update_num=tonumber(updates)

if update_num>5 then
for i in pairs(settings_table) do
setup_rings(cr,settings_table[i])
end
end

draw_clock_hands(cr,clock_x,clock_y)
end


Código do rings (rings é o nome a dar ao ficheiro)
Spoiler:
# ##############
# # - rings: - #
# ##############
# (created 09-11-2010 by Ken Berns)
#(For questions and suggestions -> ken.berns@yahoo.de)
#
######################
# - Conky settings - #
######################
background no
update_interval 1

cpu_avg_samples 2
net_avg_samples 2

override_utf8_locale yes

double_buffer yes
no_buffers yes

text_buffer_size 10240
imlib_cache_size 0

#############################
# - Window specifications - #
#############################
own_window_class Conky
own_window yes
own_window_type normal
own_window_argb_visual yes
own_window_argb_value 180
own_window_transparent yes
#own_window_hints undecorated,below,sticky,skip_taskbar,skip_pager
own_window_hints undecorated,below,skip_taskbar,skip_pager


border_inner_margin 0
border_outer_margin 0

minimum_size 1280 300
maximum_width 1260

alignment tl
gap_x 0
gap_y 60

#########################
# - Graphics settings - #
#########################
draw_shades no
draw_outline no
draw_borders no
draw_graph_borders no

#####################
# - Text settings - #
#####################
use_xft yes
xftfont Santana:size=18
xftalpha 0.8

uppercase no

default_color FFFFFF

################
# - LUA Load - #
################
#lua_load ~/.lua/scripts/clock_rings.lua
#lua_draw_hook_pre clock_rings

############
# - Code - #
############
TEXT
${voffset 170}${goto 100}${font Santana:size=24:style=Bold}${time %H:%M}


Código do startconky.sh (startconky.sh é o nome a dar ao ficheiro)
Spoiler:
#!/bin/bash
sleep 30
conky -c ~/.lua/scripts/rings &
sleep 15
conky &



OFF TOPIC


Como eu tinha dito e sou uma pessoa coerente, se o Cláudio apagasse os meus posts, eu não o aceitaria. E, como também o disse, se tivesse mal, mudava-me! Como tal, este foi o meu último post e dou assim por terminada a minha relação com este forum! Desejo a todos as melhores felicidades.
De qualquer maneira durante os próximos dias, virei verificar este post (e só este!) caso haja alguma dúvida poque, como fui eu o responsável por publicar este conky, é minha obrigação responder a eventuais perguntas relacionadas com ele.

Cumps.
It is only in Love and Murder, that we still remain sincere! - Friedrich Durrenmatt
Avatar do usuário
Miguel Fonseca
Bleeding-edge Helper
 
Mensagens: 2512
Registrado em: 10 Junho, 2011

Próximo

Voltar para Temas do Ubuntu

Quem está online

Usuários navegando neste fórum: Nenhum usuário registrado e 3 visitantes