Bem-vindo: Ter, 19 de Março 2024, 8:06 Pesquisa avançada

Mostre o seu Desktop!

Apresente aqui temas que gostou, skins de programas, ícones, wallpapers, conky's, etc. Ou seja, tudo o que possa alterar de estético no seu Ubuntu, apresente aqui. Em caso de dúvidas de personalização ou se quiser mostrá-la ao mundo, utilize esta secção!

Re: Mostre o seu Desktop!

Mensagempor Gramathur » Sex, 15 de Julho 2011, 1:17



Nossa..... :medo:

Muito, mas muito bom este!! Sem palavras..

Gramathur
 
Mensagens: 220
Registrado em: 09 Junho, 2011

Re: Mostre o seu Desktop!

Mensagempor miles_maverick » Sex, 15 de Julho 2011, 2:10

Lxde: Leve desde o inicio
Imagem


  • Sistema Operativo: Ubuntu 10.04 com LXDE
  • Tema: Elementary
  • Ícones: Elementary
  • Wallpaper: Eu mesmo fiz
  • Outros: -
Avatar do usuário
miles_maverick
 
Mensagens: 1004
Registrado em: 25 Junho, 2011
Localização: Barueri

Re: Mostre o seu Desktop!

Mensagempor anna kamilla » Dom, 17 de Julho 2011, 1:50

[center]ubuntu 10.04 blue
Imagem
  • Sistema Operativo:ubuntu lucid lynx
  • Tema:ambiance blue
  • Ícones: fekete
  • Wallpaper:http://gnome-look.org/content/show.php/illusion-6?content=143680
  • Outros: awn com o tema dark theme 1.0
Avatar do usuário
anna kamilla
 
Mensagens: 48
Registrado em: 12 Junho, 2011

Re: Mostre o seu Desktop!

Mensagempor zardos666 » Seg, 18 de Julho 2011, 0:13

#rrack

Será que podia deixar aqui o o ficheiro de configuração desse conky?
Está muito bom :D

zardos666
 
Mensagens: 28
Registrado em: 10 Junho, 2011

Re: Mostre o seu Desktop!

Mensagempor marcos.vargens » Seg, 18 de Julho 2011, 5:23

Miguel72 » Qua Jul 13, 2011 7:06 am escreveu:
Quando tiver paciência, "posto" aqui o resultado da minha aventura.


Como havia prometido, aqui está:


[center]CONTRASTES



Desculpe não ter respondido antes, não recebi atualização via email do forum. De qualquer forma vi que você conseguiu mesmo sem ajuda. Meus parabens ficou muito bom.
Editado pela última vez por marcos.vargens em Seg, 18 de Julho 2011, 5:42, em um total de 1 vez.

marcos.vargens
 
Mensagens: 603
Registrado em: 12 Julho, 2011

Re: Mostre o seu Desktop!

Mensagempor Gramathur » Seg, 18 de Julho 2011, 5:26

zardos666 » Dom Jul 17, 2011 8:13 pm escreveu:#rrack

Será que podia deixar aqui o o ficheiro de configuração desse conky?
Está muito bom :D
Sou par no pedido. :OK:

Gramathur
 
Mensagens: 220
Registrado em: 09 Junho, 2011

Re: Mostre o seu Desktop!

Mensagempor Roger Braga » Ter, 19 de Julho 2011, 3:17

ILUMINADO
Imagem

AGARB REGOR


Imagem
:ubuntued: "Somente seres humanos excepcionais e irrepreensíveis suscitam ideias generosas e ações elevadas. O conhecimento é limitado. A imaginação envolve ao mundo."
:ubuntued:
Avatar do usuário
Roger Braga
Mr. Deskmod
 
Mensagens: 755
Registrado em: 04 Julho, 2011
Localização: São Paulo, BRASIL

Re: Mostre o seu Desktop!

Mensagempor Abacaxi » Ter, 19 de Julho 2011, 3:34

Balloons

Imagem

Kubuntu 11.04 + Kde 4.6.5 + Kernel 2.6.38-10
Avatar do usuário
Abacaxi
 
Mensagens: 1
Registrado em: 19 Julho, 2011

Re: Mostre o seu Desktop!

Mensagempor maujoao » Ter, 19 de Julho 2011, 3:56

Miguel72 » Qua Jul 13, 2011 7:06 am escreveu:
Quando tiver paciência, "posto" aqui o resultado da minha aventura.


Como havia prometido, aqui está:


CONTRASTES

Imagem

Imagem


Muito bonito seu conky , tem como vc postar ele
Obrigado!!

maujoao
 
Mensagens: 2
Registrado em: 18 Julho, 2011

Re: Mostre o seu Desktop!

Mensagempor Miguel Fonseca » Ter, 19 de Julho 2011, 9:22

"maujoao » Ter Jul 19, 2011 3:56 am"]
Muito bonito seu conky , tem como vc postar ele Obrigado!!


Aqui está maujoao:

Spoiler:
--[[
Clock Rings by Linux Mint (2011) reEdited by despot77

This script draws percentage meters as rings, and also draws clock hands if you want! It is fully customisable; all options are described in the script. This script is based off a combination of my clock.lua script and my rings.lua script.

IMPORTANT: if you are using the 'cpu' function, it will cause a segmentation fault if it tries to draw a ring straight away. The if statement on line 145 uses a delay to make sure that this doesn't happen. It calculates the length of the delay by the number of updates since Conky started. Generally, a value of 5s is long enough, so if you update Conky every 1s, use update_num>5 in that if statement (the default). If you only update Conky every 2s, you should change it to update_num>3; conversely if you update Conky every 0.5s, you should use update_num>10. ALSO, if you change your Conky, is it best to use "killall conky; conky" to update it, otherwise the update_num will not be reset and you will get an error.

To call this script in Conky, use the following (assuming that you save this script to ~/scripts/rings.lua):
lua_load ~/scripts/clock_rings.lua
lua_draw_hook_pre clock_rings

Changelog:
+ v1.0 -- Original release (30.09.2009)
v1.1p -- Jpope edit londonali1010 (05.10.2009)
*v 2011mint -- reEdit despot77 (18.02.2011)
]]

settings_table = {
{
-- Edit this table to customise your rings.
-- You can create more rings simply by adding more elements to settings_table.
-- "name" is the type of stat to display; you can choose from 'cpu', 'memperc', 'fs_used_perc', 'battery_used_perc'.
name='time',
-- "arg" is the argument to the stat type, e.g. if in Conky you would write ${cpu cpu0}, 'cpu0' would be the argument. If you would not use an argument in the Conky variable, use ''.
arg='%I.%M',
-- "max" is the maximum value of the ring. If the Conky variable outputs a percentage, use 100.
max=12,
-- "bg_colour" is the colour of the base ring.
bg_colour=0xffffff,
-- "bg_alpha" is the alpha value of the base ring.
bg_alpha=0.1,
-- "fg_colour" is the colour of the indicator part of the ring.
fg_colour=0xFF6600,
-- "fg_alpha" is the alpha value of the indicator part of the ring.
fg_alpha=0.2,
-- "x" and "y" are the x and y coordinates of the centre of the ring, relative to the top left corner of the Conky window.
x=100, y=150,
-- "radius" is the radius of the ring.
radius=50,
-- "thickness" is the thickness of the ring, centred around the radius.
thickness=5,
-- "start_angle" is the starting angle of the ring, in degrees, clockwise from top. Value can be either positive or negative.
start_angle=0,
-- "end_angle" is the ending angle of the ring, in degrees, clockwise from top. Value can be either positive or negative, but must be larger than start_angle.
end_angle=360
},
{
name='time',
arg='%M.%S',
max=60,
bg_colour=0xffffff,
bg_alpha=0.1,
fg_colour=0xFF6600,
fg_alpha=0.4,
x=100, y=150,
radius=56,
thickness=5,
start_angle=0,
end_angle=360
},
{
name='time',
arg='%S',
max=60,
bg_colour=0xffffff,
bg_alpha=0.1,
fg_colour=0xFF6600,
fg_alpha=0.6,
x=100, y=150,
radius=62,
thickness=5,
start_angle=0,
end_angle=360
},
{
name='time',
arg='%d',
max=31,
bg_colour=0xffffff,
bg_alpha=0.1,
fg_colour=0xFF6600,
fg_alpha=0.8,
x=100, y=150,
radius=70,
thickness=5,
start_angle=-90,
end_angle=90
},
{
name='time',
arg='%m',
max=12,
bg_colour=0xffffff,
bg_alpha=0.1,
fg_colour=0xFF6600,
fg_alpha=1,
x=100, y=150,
radius=76,
thickness=5,
start_angle=-90,
end_angle=90
},
{
name='cpu',
arg='cpu0',
max=100,
bg_colour=0xffffff,
bg_alpha=0.2,
fg_colour=0xFF6600,
fg_alpha=0.8,
x=50, y=300,
radius=35,
thickness=4,
start_angle=-90,
end_angle=180
},
{
name='cpu',
arg='cpu1',
max=100,
bg_colour=0xffffff,
bg_alpha=0.2,
fg_colour=0xFF6600,
fg_alpha=0.8,
x=50, y=300,
radius=30,
thickness=4,
start_angle=-90,
end_angle=180
},
{
name='memperc',
arg='',
max=100,
bg_colour=0xffffff,
bg_alpha=0.2,
fg_colour=0xFF6600,
fg_alpha=0.8,
x=130, y=309,
radius=25,
thickness=5,
start_angle=-90,
end_angle=180
},
{
name='swapperc',
arg='',
max=100,
bg_colour=0xffffff,
bg_alpha=0.2,
fg_colour=0xFF6600,
fg_alpha=0.8,
x=200, y=309,
radius=25,
thickness=5,
start_angle=-90,
end_angle=180
},
{
name='fs_used_perc',
arg='/',
max=100,
bg_colour=0xffffff,
bg_alpha=0.2,
fg_colour=0xFF6600,
fg_alpha=0.8,
x=270, y=309,
radius=25,
thickness=5,
start_angle=-90,
end_angle=180
},
{
name='downspeedf',
arg='wlan0',
max=2000,
bg_colour=0xffffff,
bg_alpha=0.2,
fg_colour=0x339900,
fg_alpha=0.8,
x=50, y=400,
radius=35,
thickness=4,
start_angle=-90,
end_angle=180
},
{
name='upspeedf',
arg='wlan0',
max=500,
bg_colour=0xffffff,
bg_alpha=0.2,
fg_colour=0xff6600,
fg_alpha=0.8,
x=50, y=400,
radius=30,
thickness=4,
start_angle=-90,
end_angle=180
},
}

-- Use these settings to define the origin and extent of your clock.

clock_r=65

-- "clock_x" and "clock_y" are the coordinates of the centre of the clock, in pixels, from the top left of the Conky window.

clock_x=100
clock_y=150

show_seconds=true

require 'cairo'

function rgb_to_r_g_b(colour,alpha)
return ((colour / 0x10000) % 0x100) / 255., ((colour / 0x100) % 0x100) / 255., (colour % 0x100) / 255., alpha
end

function draw_ring(cr,t,pt)
local w,h=conky_window.width,conky_window.height

local xc,yc,ring_r,ring_w,sa,ea=pt['x'],pt['y'],pt['radius'],pt['thickness'],pt['start_angle'],pt['end_angle']
local bgc, bga, fgc, fga=pt['bg_colour'], pt['bg_alpha'], pt['fg_colour'], pt['fg_alpha']

local angle_0=sa*(2*math.pi/360)-math.pi/2
local angle_f=ea*(2*math.pi/360)-math.pi/2
local t_arc=t*(angle_f-angle_0)

-- Draw background ring

cairo_arc(cr,xc,yc,ring_r,angle_0,angle_f)
cairo_set_source_rgba(cr,rgb_to_r_g_b(bgc,bga))
cairo_set_line_width(cr,ring_w)
cairo_stroke(cr)

-- Draw indicator ring

cairo_arc(cr,xc,yc,ring_r,angle_0,angle_0+t_arc)
cairo_set_source_rgba(cr,rgb_to_r_g_b(fgc,fga))
cairo_stroke(cr)
end

function draw_clock_hands(cr,xc,yc)
local secs,mins,hours,secs_arc,mins_arc,hours_arc
local xh,yh,xm,ym,xs,ys

secs=os.date("%S")
mins=os.date("%M")
hours=os.date("%I")

secs_arc=(2*math.pi/60)*secs
mins_arc=(2*math.pi/60)*mins+secs_arc/60
hours_arc=(2*math.pi/12)*hours+mins_arc/12

-- Draw hour hand

xh=xc+0.7*clock_r*math.sin(hours_arc)
yh=yc-0.7*clock_r*math.cos(hours_arc)
cairo_move_to(cr,xc,yc)
cairo_line_to(cr,xh,yh)

cairo_set_line_cap(cr,CAIRO_LINE_CAP_ROUND)
cairo_set_line_width(cr,5)
cairo_set_source_rgba(cr,1.0,1.0,1.0,1.0)
cairo_stroke(cr)

-- Draw minute hand

xm=xc+clock_r*math.sin(mins_arc)
ym=yc-clock_r*math.cos(mins_arc)
cairo_move_to(cr,xc,yc)
cairo_line_to(cr,xm,ym)

cairo_set_line_width(cr,3)
cairo_stroke(cr)

-- Draw seconds hand

if show_seconds then
xs=xc+clock_r*math.sin(secs_arc)
ys=yc-clock_r*math.cos(secs_arc)
cairo_move_to(cr,xc,yc)
cairo_line_to(cr,xs,ys)

cairo_set_line_width(cr,1)
cairo_stroke(cr)
end
end

function conky_clock_rings()
local function setup_rings(cr,pt)
local str=''
local value=0

str=string.format('${%s %s}',pt['name'],pt['arg'])
str=conky_parse(str)

value=tonumber(str)
pct=value/pt['max']

draw_ring(cr,pct,pt)
end

-- Check that Conky has been running for at least 5s

if conky_window==nil then return end
local cs=cairo_xlib_surface_create(conky_window.display,conky_window.drawable,conky_window.visual, conky_window.width,conky_window.height)

local cr=cairo_create(cs)

local updates=conky_parse('${updates}')
update_num=tonumber(updates)

if update_num>5 then
for i in pairs(settings_table) do
setup_rings(cr,settings_table[i])
end
end

draw_clock_hands(cr,clock_x,clock_y)
end


Este é o meu conky lua que deves gravar na pasta scripts do conky com o nome clock_rings.lua, depois juntas o conkyforecast normal e já está.

Não te esqueças de adicionar o caminho para o script no ficheiro .conkyrc que está na tua pasta pessoal.

Alguma outra dúvida é só perguntar.

Cumps.

P.S. - Este conkylua foi personalizado por mim, tendo em conta um ecrã lcd com a resolução 1280x1024, mas em principio dá para outras resoluções. Testa e depois posta o resultado.
Não poderei também deixar de mencionar que personalizei um conkylua já existente e que o vi pela primeira vez neste forum no post do ambiente gráfico do marcos vargens a quem também agradeço.

É este o espírito da comunidade open source e do forum ubuntued (espero). Partilha de conhecimento e ajuda mútua.
It is only in Love and Murder, that we still remain sincere! - Friedrich Durrenmatt
Avatar do usuário
Miguel Fonseca
Bleeding-edge Helper
 
Mensagens: 2512
Registrado em: 10 Junho, 2011

AnteriorPróximo

Voltar para Temas do Ubuntu

Quem está online

Usuários navegando neste fórum: Nenhum usuário registrado e 12 visitantes

cron